Your Cart
Search used machines
PINACHO
Pinacho A-75 X 1000 lathe
- Swing over bed
- 460 mm
- Distance between centres
- 1,000 mm
- Spindle speed
- 29 to 1700.
We reply within 24 working hours.
Technical data sheet
General data
| Model | A-75 X 1000 |
|---|
Headstock and spindle
| rpm | 29 to 1700. |
|---|
Turning
| Distance between centres | 1,000 mm |
|---|---|
| Swing over bed | 460 mm |
| Swing over cross slide | 220 mm |
| Chuck guard | Yes, fold-down |
Other data
| Digital readout (DRO) | Digital dimension readout (make not legible) |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Pinacho A-75 x 1000 centre lathe
Conventional centre lathe for machining shafts, bushings, flanges and small and medium-sized parts of revolution, with 1,000 mm between centres. It is a very common format in general machining shops, maintenance workshops and vocational training.
Key strengths
Pinacho is a Spanish lathe manufacturer with a long track record in centre lathes. This unit offers a speed range from 29 to 1,700 rpm, enough for roughing at low speed and finishing at high speed. As can be seen in the photo, it has a digital readout (DRO), which speeds up work and reduces reading errors compared with verniers.
Configuration of this unit
- Distance between centres: 1,000 mm
- Swing over bed: 460 mm
- Swing over cross slide: 220 mm
- Spindle speeds: from 29 to 1,700 rpm
- Digital readout (DRO) (photo 1)
- Fold-down chuck guard (photo 1)
Typical applications
Repair and manufacture of shafts, pins, bushings and threads, one-off parts and short runs in maintenance workshops and training centres.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can come and see it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What workpiece size does the Pinacho A-75 x 1000 accept?
It takes parts up to 1,000 mm between centres, with a swing of 460 mm over the bed and 220 mm over the cross slide. It is suited to shafts, bushings, flanges and small and medium-sized parts of revolution, common in maintenance and general machining shops.
What does a digital readout add to a conventional lathe?
The readout shows the position of the carriages on screen, so the operator reads dimensions directly instead of counting divisions on the verniers. It makes it easier to work to size, reduces errors and speeds up part changes, without losing the simplicity of operation of a conventional centre lathe.
What spindle speeds does it offer?
The speed range of this unit runs from 29 to 1,700 rpm. Low speeds are used for roughing large diameters and threading, and high speeds for finishing and small-diameter parts. If you need the motor power or the spindle thread pitch, ask us and we will check them on the machine.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
Request a quote
Pinacho A-75 X 1000 lathe · Ref. 061406