Your Cart
Search used machines
HIDRAGROUP
Hidragroup 50 t die spotting press
- Control
- Separate control cabinet with push buttons
- Power
- 50 t
- Weight
- 6500 kg
We reply within 24 working hours.
Technical data sheet
General data
| Model | HIDRA GROUP |
|---|---|
| Control | Separate control cabinet with push buttons |
Headstock and spindle
| Power | 50 t |
|---|
Dimensions, weight and connection
| Weight | 6500 kg |
|---|
Other data
| Min. / max. daylight between platens | 400/1200 mm |
|---|---|
| Lower platen extraction | Yes |
| Guards | Perimeter mesh guards |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Hidragroup 50 t die spotting press
Hydraulic press for the adjustment and touching-up of moulds, known in the workshop as a die spotting or inking press. It allows the two halves of a mould or die to be closed under controlled pressure to check the contact between surfaces and adjust closures and parting lines before taking the tool to the injection machine or production press.
Main features
Its key element is the removable lower platen: the lower half of the mould slides out of the pressing zone so that the fitter can work on it comfortably and then moves back in for a new closing. The daylight between platens, from 400 to 1,200 mm, allows moulds of considerable height to be worked with a force of 50 t. The photos show perimeter mesh guards and a separate control cabinet with push buttons.
Configuration of this unit
- Force: 50 t
- Minimum / maximum daylight between platens: 400 / 1,200 mm
- Removable lower platen: yes
- Perimeter mesh guards (photos 1 and 2)
- Separate control cabinet with push buttons (photos 2 and 3)
- Weight: 6,500 kg
Typical applications
Mould shops for plastic injection, blow moulding or die casting, die-making shops and tooling maintenance departments: checking closures, adjusting parting lines and verifying slides.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is a die spotting press used for?
It is used to close the two halves of a mould or die away from the production machine and check how they seat. With contact paint, the points that touch and those that do not are located, and closures, parting lines and slides are adjusted. This reduces trials on the injection machine and shortens mould set-up time.
What mould height does this press accept?
The daylight between platens on this unit varies between 400 and 1,200 mm, so it takes closed moulds whose total height is within that range. The available force is 50 t. The useful dimensions of the platens are not listed in our data sheet; ask us and we will confirm them before purchase.
What is the advantage of the removable lower platen?
It allows the lower half of the mould to be slid out of the pressing zone to clean it, apply contact paint or touch it up without working under the upper platen. The platen then returns to its position for a new closing. This speeds up the adjustment cycle and improves the fitter's ergonomics and safety.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
Request a quote
Hidragroup 50 t die spotting press · Ref. 061429