Your Cart
Search used machines
TAMEGAR
Tamegar PM56T spotting press
- Year
- 1999
- Table
- 1,000 X 700
- Power
- 56
- Weight
- 2,700 KG
We reply within 24 working hours.
Technical data sheet
General data
| Model | PM 56 T |
|---|---|
| Type | Spotting - stamping |
| Year | 1999 |
Travels and table
| Table dimensions | 1,000 X 700 |
|---|
Headstock and spindle
| Power | 56 |
|---|---|
| Motor power | 4 kW |
Dimensions, weight and connection
| Weight | 2,700 KG |
|---|---|
| Voltage | 380 V + N |
Other data
| Stroke | 700 |
|---|---|
| Min. / max. distance between platens | 200 - 700 |
| Machine no. | 509 |
| Maximum pressure | 150 bar |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Hydraulic press for spotting and trying out moulds
The Tamegar PM 56 T is a hydraulic spotting and stamping press made by Tamegar in Elche (Alicante). It is used in mould and die shops to close, adjust and check the contact between the two halves of a mould, and for small stamping jobs.
Key strengths of the machine
A spotting or die-setting press closes the mould under controlled pressure away from the injection machine or production press, which saves machine time and makes it easier to rework the closing surfaces. This unit has hydraulic drive, with a pressure gauge on the control desk, mesh guards with doors and its own electrical cabinet.
Configuration of this unit
- Model: PM 56 T, machine no. 509, year 1999 (plate)
- Type: spotting and stamping
- Force: 56 t
- Stroke: 700 mm
- Table: 1,000 x 700 mm
- Daylight: 200 to 700 mm
- Maximum hydraulic pressure: 150 bar; power 4 kW; 380 V (plate)
- Weight: 2,700 kg
Typical applications
Spotting and checking the closure of plastic injection, footwear and rubber moulds, die assembly, light drawing, pressing and small stamping jobs.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own technical service takes care of transport, installation and commissioning.
Frequently asked questions
What is a mould spotting press used for?
It closes the two halves of a mould or die with a controlled force away from the production machine. The mouldmaker can then check the contact of the closing surfaces, adjust and rework without tying up the injection machine or the main press, which reduces downtime and speeds up setting-up.
What mould size does the Tamegar PM 56 T accept?
It has a 1,000 x 700 mm table and a daylight of 200 to 700 mm, with a 700 mm stroke. It takes small and medium-sized moulds and dies whose closed height falls within that range, with a maximum force of 56 tonnes.
Is it a mechanical or a hydraulic press?
It is hydraulic. The rating plate shows a maximum pressure of 150 bar and a power of 4 kW, and the control desk includes a pressure gauge. Hydraulic drive lets you regulate the force and stop the platen at any point of the stroke, which is useful for mould spotting.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our technical service.
- More than 45 years Used machinery trading backed by our technical service.
Request a quote
Tamegar PM56T spotting press · Ref. 059648