Your Cart
Search used machines
SORALUCE
Moving-column milling machine Soraluce SV-HSC 8000
- Year
- 01/14
- Control
- Heidenhain TNC 530
- X/Y/Z travels
- (X) 7000, (Y) 1200, (Z) 2000
- Taper
- ISO 50 DIN 69871
- Spindle speed
- 20 - 6,000 rpm
- Table
- 8000 X 1100
We reply within 24 working hours.
Technical data sheet
General data
| Model | SV-HSC8000 |
|---|---|
| Control | Heidenhain TNC 530 |
| Year | 01/14 |
| Control pendant | Mobile control pendant with portable electronic handwheel |
Travels and table
| X, Y, Z travels | (X) 7000, (Y) 1200, (Z) 2000 |
|---|---|
| Table dimensions | 8000 X 1100 |
Headstock and spindle
| Taper | ISO 50 DIN 69871 |
|---|---|
| Spindle speed (rpm) | 20 - 6,000 rpm |
| Main motor power | 27 |
Other data
| Head swivel | Automatic 1° |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Moving-column milling machine for long workpieces
The Soraluce SV-HSC 8000 is a CNC moving-column milling machine built in Gipuzkoa, designed to machine long, heavy workpieces in a single set-up: beds, beams, machine frames, large-format moulds and machined fabrications. The column travels along a fixed 8,000 mm table, so the workpiece does not move during machining.
Key strengths of the model
Soraluce designs the SV series as moving-column milling machines with a swivelling head, which allows several faces of the workpiece to be machined without removing it. The Heidenhain TNC 530 control offers conversational shop-floor programming as well as ISO, widely used in the machining of one-off parts and short runs.
Configuration of this unit
- Model: SV-HSC 8000, year 2014 (01/14)
- Control: Heidenhain TNC 530
- Travels: X 7,000 mm, Y 1,200 mm, Z 2,000 mm
- Table: 8,000 x 1,100 mm
- Taper: ISO 50 DIN 69871
- Head: 20 - 6,000 rpm, automatic swivel in 1° steps
- Main motor power: 27 kW
- Mobile control panel with portable electronic handwheel (visible in photos)
Typical applications
Facing and squaring of beds, drilling and tapping of welded frames, machining of very long plates and beams, and subcontract work on large parts for capital equipment, energy or rail.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own technical service takes care of transport, installation and commissioning.
Frequently asked questions
What workpiece size does the Soraluce SV-HSC 8000 accept?
This unit has an 8,000 x 1,100 mm table and travels of 7,000 mm in X, 1,200 mm in Y and 2,000 mm in Z. It is designed for long parts such as beds, beams or frames, which can be machined in a single set-up while the column travels along the table.
Which CNC control does this milling machine have?
It has a Heidenhain TNC 530 control, which lets you program in Heidenhain conversational language directly at the machine or load ISO programs from CAM. It is a control well known to milling programmers in Spain, which makes it easier to bring the machine into the workshop.
What is the advantage of a moving-column milling machine over a fixed-bed one?
In a moving-column milling machine the workpiece stays still on the table and it is the column that moves. This allows very long, heavy parts to be machined without moving large masses, and the table can be divided into zones so that one part is set up while another is being machined.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our technical service.
- More than 45 years Used machinery trading backed by our technical service.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
Request a quote
Moving-column milling machine Soraluce SV-HSC 8000 · Ref. 059183