Your Cart
Search used machines
HURCO
Hurco VMX50 machining centre
- Year
- 2002
- Control
- ULTIMAX 4
- X/Y/Z travels
- 1270 X 660 X 640
- Taper
- SK 40
- Table
- 1500 X 600
- Tools
- Yes
We reply within 24 working hours.
Technical data sheet
General data
| Model | VMX50 |
|---|---|
| Control | ULTIMAX 4 |
| Year | 2002 |
| Model marking | VMX50 S |
| Control console | Ultimax dual-screen |
Travels and table
| Table dimensions | 1500 X 600 |
|---|---|
| X, Y, Z travels | 1270 X 660 X 640 |
Headstock and spindle
| Taper | SK 40 |
|---|
Tooling and equipment
| Through-tool coolant | Yes |
|---|---|
| Tool changer | 24 positions |
Dimensions, weight and connection
| Overall dimensions | 3250 × 2320 × 2900 |
|---|---|
| Weight | 6,500 |
Other data
| Swarf conveyor | Yes |
|---|---|
| Documentation | Hurco manuals in the machine cabinet |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Three-axis vertical machining centre
The Hurco VMX50 is a vertical machining centre with a large table for medium-sized prismatic parts: plates, fixtures, small moulds, machinery parts and prototypes. Its 1,270 mm X travel also lets you clamp several workpieces on the table and machine them in the same cycle.
Model and control highlights
Hurco is known for its own Ultimax control, which offers conversational on-screen programming as well as ISO code, speeding up set-up for one-off parts and short runs right at the machine. This unit has the dual-screen console typical of Ultimax.
Configuration of this unit
- Model: VMX50 (labelled VMX50 S on the enclosure), year 2002
- Control: Hurco Ultimax 4, dual-screen console
- Travels: 1,270 x 660 x 640 mm
- Table: 1,500 x 600 mm
- Taper: SK 40
- 24-position tool changer
- Through-tool coolant
- Swarf conveyor
- Hurco manuals in the machine cabinet (visible in photo)
- Overall dimensions: 3,250 x 2,320 x 2,900 mm
- Weight: 6,500 kg
Typical applications
Milling of plates and flanges, deep-hole drilling with internal coolant, machining of fixtures and light die work, and subcontract jobs with frequent workpiece changes.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What workpiece size does the Hurco VMX50 take?
This unit has a 1,500 x 600 mm table and travels of 1,270 mm in X, 660 mm in Y and 640 mm in Z. It suits medium-sized prismatic parts, or clamping several small parts on the table at once.
What is the advantage of the Hurco Ultimax control?
Ultimax is Hurco's own control. It allows conversational programming, entering the geometry and operations on screen without writing code, and it also accepts ISO programs generated by CAM. It is practical for shops that make one-off parts or short runs with frequent changeovers.
What is through-tool coolant for?
It carries coolant through the spindle and the tool to the cutting edge. It improves swarf evacuation in deep-hole drilling, extends the life of drills and milling cutters and allows higher feed rates. This unit has this function according to our technical data sheet.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
Request a quote
Hurco VMX50 machining centre · Ref. 048359