Your Cart
Search used machines
Vertical machining centre Quaser MV154PL-12
- Year
- 2005
- Control
- HEIDENHAIN 530 i TNC
- X/Y/Z travels
- 1020 x 500 x 500
- Spindle speed
- 12,000 rpm
- Table
- 1250 x 500
- Tools
- Yes
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | MV154 PL/12 |
|---|---|
| Control | HEIDENHAIN 530 i TNC |
| Year | 2005 |
| Spindle speed (marked on machine) | 12,000 min-1 |
| Control | Heidenhain (screen and alphanumeric keyboard) |
Travels and table
| Table dimensions | 1250 x 500 |
|---|---|
| X, Y, Z travels | 1020 x 500 x 500 |
Headstock and spindle
| Spindle speed (rpm) | 12,000 rpm |
|---|---|
| Spindle system | Big-Plus (marked on machine) |
Tooling and equipment
| Through-tool coolant | Yes |
|---|---|
| Tool changer | Yes |
Dimensions, weight and connection
| Overall dimensions | 2470 × 2540 × 2830 |
|---|---|
| Weight | 6850 |
Other data
| Swarf conveyor | Yes |
|---|---|
| Swarf conveyor | Yes |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Quaser MV154 PL/12 vertical machining centre
The Quaser MV154 PL/12 is a vertical machining centre with a 12,000 rpm spindle (as marked on the machine) and 1,020 mm of X-axis travel. It is suited to small and medium-sized parts in aluminium and steel, repeat batches, tooling and precision components.
Key strengths
The machine carries a Big-Plus marking, a spindle system with simultaneous face and taper contact. It is fitted with a Heidenhain control with screen and alphanumeric keyboard; according to our data sheet it includes a tool changer, through-tool coolant and a swarf conveyor. In the photos, the control screen shows a disk boot error message, so the condition of the control must be checked before any purchase.
Configuration of this unit
- Model MV154 PL/12, year 2005
- Heidenhain 530 i TNC control (according to data sheet)
- Table: 1,250 x 500 mm
- X/Y/Z travels: 1,020 / 500 / 500 mm
- 12,000 rpm spindle, Big-Plus system (marked on the machine)
- Through-tool coolant
- Tool changer and swarf conveyor
- Overall dimensions: 2,470 x 2,540 x 2,830 mm; weight: 6,850 kg
Typical applications
Milling, drilling and tapping of parts within the 1,020 mm X-axis travel, with high spindle speed for aluminium and fine finishing.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What travels and table does the Quaser MV154 PL/12 have?
According to our data sheet it has 1,020 mm of travel in X and 500 mm in Y and Z, with a 1,250 x 500 mm table. It is suited to small and medium-sized parts, or several parts on the table at once. We can check that your part fits before you decide.
What spindle speed does it have?
The spindle reaches 12,000 rpm, a figure marked on the front of the machine itself and recorded in our data sheet. The photos also show the Big-Plus marking, a toolholding system with dual contact. This configuration is useful for aluminium and precision finishing.
Which CNC control is fitted and what condition is it in?
Our data sheet states Heidenhain 530 i TNC, and the photos show a Heidenhain control with alphanumeric keyboard, with the screen displaying a disk boot error. The condition of the control must therefore be checked before purchase; contact us and we will keep you informed.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Vertical machining centre Quaser MV154PL-12 · Ref. 058238
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.