Your Cart
Search used machines
QUASER
Vertical machining centre Quaser MV154APC-P12 with rotary pallet changer
- Year
- 2008
- Control
- FANUC 18i MB
- X/Y/Z travels
- 700X500X560
- Taper
- BT-40
- Spindle speed
- 12000 1/MIN
- Table
- 800x500
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | MV154APC/P12 |
|---|---|
| Control | FANUC 18i MB |
| Year | 2008 |
Travels and table
| Table dimensions | 800x500 |
|---|---|
| X, Y, Z travels | 700X500X560 |
Headstock and spindle
| Taper | BT-40 |
|---|---|
| Spindle speed (rpm) | 12000 1/MIN |
Dimensions, weight and connection
| Overall dimensions | 410x251x294 |
|---|---|
| Weight | 7500 |
Other data
| Swarf conveyor | Yes |
|---|---|
| Pallet changer | APC/P (marking) |
| External hydraulic unit | visible |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Quaser MV154 APC/P12 vertical machining centre from 2008 with automatic pallet changer. Travels are 700 x 500 x 560 mm and the spindle reaches 12,000 rpm, making it suitable for series production with reduced idle time.
What the model offers
According to used-machine listings for the model, the Quaser MV154 APC/P is a compact, fast vertical centre with pallet changer, Fanuc 18i-MB control and a high-capacity tool changer. The pallet system lets you load one part while the machine is cutting another.
Configuration of this unit
- Control: Fanuc 18i MB
- Automatic pallet changer, marked APC/P
- Table: 800 x 500 mm
- X, Y, Z travels: 700 x 500 x 560 mm
- Taper: BT-40
- Spindle: 12,000 rpm
- Swarf conveyor (external conveyor visible in the photos)
- External hydraulic unit at the rear
- Year: 2008
- Weight: 7,500 kg
Typical applications
Medium and long runs of aluminium, steel or cast iron parts: automotive components, hydraulics, small moulds and machinery parts with several operations.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is the advantage of a machining centre with a pallet changer?
It lets you prepare a part on one pallet while the machine is cutting another, which reduces downtime for loading and unloading. On this Quaser MV154 the marking reads APC/P. It is particularly useful for medium and long runs.
What travels and speed does the Quaser MV154 have?
Travels are 700 mm in X, 500 mm in Y and 560 mm in Z, with an 800 x 500 mm table, BT-40 taper and a spindle of up to 12,000 rpm. The control is a Fanuc 18i MB. It weighs 7,500 kg according to our technical data sheet.
Does it have a swarf conveyor?
Yes, our data sheet lists a swarf conveyor, and the photos show the external conveyor at the side of the machine, next to the hydraulic unit. It helps keep the work area clean and removes swarf during continuous machining, which is key in series production.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Vertical machining centre Quaser MV154APC-P12 with rotary pallet changer · Ref. 058241
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.