Language

Your Cart

Search used machines

UsedSold

JOHNFORD

Vertical machining centre Johnford VMC-850

  • Sold
  • Ref. 029489
  • Monforte del Cid (Alicante)
Year
2002
Control
FANUC 0iMD
X/Y/Z travels
800 (X), 500 (Y), 610 (Z)
Taper
BT-40
Spindle speed
60-8000 rpm
Table
1000x500
This machine has already been sold

Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.

Call +34 966 662 296
See similar machines available

We reply within 24 working hours.

Technical data sheet

General data

ModelVMC-850
ControlFANUC 0iMD
Year2002

Travels and table

Table dimensions1000x500
X, Y, Z travels800 (X), 500 (Y), 610 (Z)

Headstock and spindle

TaperBT-40
Spindle speed (rpm)60-8000 rpm

Tooling and equipment

Through-tool coolantYes
Tool changerRandom

Dimensions, weight and connection

Overall dimensions2350x2200x2698 mm
Weight5500 KG

Other data

Swarf conveyorAuger type

Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.

Description and equipment

What it is

Johnford VMC-850 three-axis vertical machining centre for machining prismatic parts in steel, cast iron and aluminium in production and subcontract machining shops.

Key strengths

Johnford is a Taiwanese machine tool manufacturer. Listings for other VMC-850 units describe a machine with 800 x 500 x 610 mm travels and a 1,000 x 500 mm table, figures that match our data sheet. Fanuc is a very widely used control, which makes maintenance and programming easier.

Configuration of this unit

  • Model: VMC-850
  • Year: 2002 (per data sheet)
  • Control: Fanuc 0iMD
  • Table: 1,000 x 500 mm
  • X, Y, Z travels: 800 x 500 x 610 mm
  • Taper: BT-40
  • Spindle speed: 60 - 8,000 rpm
  • Through-tool coolant: yes
  • Tool changer: random
  • Swarf conveyor: auger type
  • Overall dimensions: 2,350 x 2,200 x 2,698 mm; weight: 5,500 kg

Typical applications

Machinery parts, tooling, simple moulds, brackets, flanges and plates requiring milling, drilling and tapping, in short or medium batches.

See it at Ferrotall

The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.

Frequently asked questions

What travels does the Johnford VMC-850 have?

According to our data sheet, 800 mm in X, 500 mm in Y and 610 mm in Z, with a 1,000 x 500 mm table. This allows prismatic parts up to around 800 mm long to be machined. Please check the maximum table load with us before deciding.

What control and taper does this unit have?

The data sheet lists a Fanuc 0iMD control and BT-40 taper, with a spindle speed of 60 to 8,000 rpm. BT-40 is a very widely used taper, so toolholders are easy to find. If you have ISO/DIN tooling, ask us about compatibility.

Does it support through-tool coolant?

Yes, the data sheet for this unit lists through-tool coolant. It is useful for deep drilling and for machining that produces a lot of swarf, because the coolant reaches the cutting zone directly. The available pressure and the condition of the system should be confirmed with our service engineers.

Visit, transport and commissioning

  • See it running Visit it at our facilities or ask us for a video of the machine under power.
  • Transport We handle dismantling, loading and transport to your workshop.
  • Commissioning Installation, levelling and commissioning by our service engineers.
  • More than 45 years Used machinery trading backed by our service engineers.
Vertical machining centre Johnford VMC-850
📞