Your Cart
Search used machines
SAMUR
Vertical bandsaw Samur S-400
- Spindle speed
- 12 to 448 m/min (plate table)
- Weight
- 290
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | S-400 |
|---|---|
| Type | Band |
| Make and model | Samur S-400 |
Headstock and spindle
| Band speeds | 12 to 448 m/min (plate table) |
|---|
Dimensions, weight and connection
| Overall dimensions | 1900x870x600 |
|---|---|
| Weight | 290 |
Other data
| Capacity | 400 |
|---|---|
| Drive | Automatic |
| Automatic feed | No |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Samur S-400 vertical bandsaw
Samur vertical endless bandsaw, model S-400 according to the machine plate. It is used to cut contours and marked-out shapes in sheet metal, sections and workshop parts, following the scribed line with the work resting on the table.
Key strengths
The plate on this unit carries a table of band speeds (in m/min) combining pulleys and ratios, with values between 12 and 448 m/min. This range lets you match the cutting speed to the material and thickness.
Configuration of this unit
- Make and model (plate): Samur S-400, endless bandsaw
- Large worktable with blade guide and height-adjustable blade guard
- Band wheel with side cover
- Speed selector and start control on the front of the column
- Band speed table on the plate: 12 to 448 m/min
- Automatic feed: no (data sheet)
Typical applications
Cutting contours and shapes in sheet and plate, trimming workshop parts, making templates, and maintenance and tooling work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is a vertical bandsaw used for?
It is used to cut contours and shapes in sheet, plate and sections, following a marked line. Unlike a horizontal bandsaw, which cuts bar square, here the workpiece is guided by hand across the table. It is common in maintenance, toolmaking and light fabrication shops.
What band speeds does it have?
The machine plate carries a table of speeds in m/min according to the pulley and ratio selected, with values from 12 to 448 m/min. This allows the speed to be matched to the material and thickness being cut.
Does it have automatic feed?
No: according to our data sheet, there is no automatic feed. The workpiece is pushed by hand across the table, with the operator guiding the cut. The capacity, dimensions and weight figures in the data sheet have no units, and we will confirm them before the sale.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Vertical bandsaw Samur S-400 · Ref. 022200
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.