Your Cart
Search used machines
MRF
Universal milling machine MRF-FU 160
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | FU 160 |
|---|---|
| Type | Universal |
Other data
| Make | MRF |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is and what it is used for
The MRF FU 160 is a conventional universal milling machine from our used stock, suited to manual machining of one-off parts and small batches in maintenance, toolroom and general engineering shops.
Configuration of this unit
- Make: MRF (plate visible on the top of the machine)
- Model: FU 160
- Type: universal
- Control box with start, stop and emergency stop push-buttons
Typical applications
Face milling, squaring and slotting, drilling and boring of steel and cast iron parts, repair work and fixture making in conventional machining shops.
In the photos the machine is surrounded by loose tooling and parts; its table dimensions, travels and power are not listed on our data sheet.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What type of machine is the MRF FU 160?
It is a conventional universal milling machine made by MRF, according to the data sheet for our unit. It is operated manually, without numerical control, and is used to mill faces, slots and square shoulders on one-off parts or short runs.
Does it have numerical control?
According to our data sheet it is a conventional universal milling machine, and the photos show only operating push-buttons, with no control screen. If you need to know whether it has a digital readout, a dividing head or other accessories, contact us and we will confirm it with the machine in front of us.
What parts is it suited to?
General engineering parts produced by manual milling operations: face milling, slots, steps and drilling. The table dimensions and travels are not listed on our data sheet, so please check with us that your part will fit before deciding.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Universal milling machine MRF-FU 160 · Ref. 034829
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.