Your Cart
Search used machines
LAGUN
Universal milling machine Lagun FU 1600
- Year
- 1991
- X/Y/Z travels
- (X) 1170 mm, (Y) 320 mm, (Z) 470 mm
- Taper
- ISO 50
- Spindle speed
- 1400
- Table
- 1600 X 340 mm
- Power
- 4.5
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | FU-1600 |
|---|---|
| Type | Universal |
| Year | 1991 |
Travels and table
| X, Y, Z travels | (X) 1170 mm, (Y) 320 mm, (Z) 470 mm |
|---|---|
| Table dimensions | 1600 X 340 mm |
Headstock and spindle
| Taper | ISO 50 |
|---|---|
| Boring spindle motor power | 4.5 |
| Spindle speed (rpm) | 1400 |
Other data
| Accessories seen in photos (ask whether included) | vice and dividing head with 3-jaw chuck |
|---|---|
| Digital readout (DRO) | digital readout and control console with ammeter |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is
The Lagun FU-1600 is a long-table universal milling machine with a swivelling universal head and a horizontal milling arbor, for machining medium-sized and large workshop parts with side and face cutters or end mills. Lagun is a Spanish manufacturer of conventional milling machines.
Key strengths
Listings for the FU-1600 series describe a swivelling head, power and rapid feeds on all three axes, and coolant. On our unit you can see a digital readout and a control console with an ammeter.
Configuration of this unit
- Model: Lagun FU-1600 (marking partly visible)
- Year: 1991 (our data sheet)
- Type: universal; 1,600 x 340 mm table
- X, Y, Z travels: 1,170 x 320 x 470 mm
- Taper: ISO 50 (our data sheet)
- Head speed: 1,400 rpm (our data sheet)
- Digital readout with X/Y/Z keypad, make not legible, and control console with ammeter
- The photos show a vice and a dividing head with a three-jaw chuck; please ask whether they are included with the machine
Typical applications
Face milling and slotting, squaring, machining of medium-sized fabrication and tooling parts, and dividing-head work such as gears and shafts.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What taper does the FU-1600 have?
According to our data sheet, ISO 50, which is suited to heavy milling loads. The photos do not show the spindle with a toolholder, so we will confirm it during the visit. If you have any questions about your specific application, our service engineers can advise you before the visit.
What workpiece size does it accept?
According to our data sheet, the table measures 1,600 x 340 mm and the travels are 1,170 x 320 x 470 mm in X, Y and Z. It is suitable for long and medium-sized parts. If you have any questions about your specific application, our service engineers can advise you before the visit.
Are the vice and dividing head shown in the photos included?
The photos show a vice and a dividing head with a three-jaw chuck. Please ask whether they are included: we do not assume they come with the machine, and we will confirm it in writing. Our service engineers can advise you before the visit.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Universal milling machine Lagun FU 1600 · Ref. 039165
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.