Your Cart
Search used machines
Sheet metal cutter Somme
- Year
- 1995
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Year | 1995 |
|---|---|
| Brand | Somme |
Other data
| Drive | Electric motor with belt |
|---|---|
| Guard | Front blade guard |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Somme guillotine shear
Shear for straight cutting of sheet metal, of the kind used in plate work, metal fabrication and workshops that prepare flat parts before bending or welding.
What the photos show
The frame is cast iron, with the Somme logo cast into the upper part. Drive is by an electric motor with belt transmission to the machine shaft. The cutting area has a guard with yellow and black stripes, and the front a yellow sheet-metal panel. The table has two areas with T-slots and cut-outs.
Configuration of this unit
- Brand: Somme (logo on the frame)
- Year: 1995 (according to data sheet)
- Drive: electric motor and belt transmission
- Front blade guard and front panel
- Control box with push buttons on the side
Cutting length, maximum thickness, power and weight are not recorded in the data sheet, so we do not state them.
Typical applications
Cutting steel sheet in plate work, metal fabrication and flat part production workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What cutting length does this shear have?
We have not confirmed it: our data sheet does not include it and the photos do not show a legible plate. Contact us and we will measure it on the machine before you decide. It is the key figure for knowing whether the shear suits the sheet your workshop cuts.
How is this shear driven?
By an electric motor with belt transmission, as seen in the photos. The blade works on a cast iron frame and the cutting area has a front guard. It is a mechanical guillotine shear; we cannot state its power or cutting capacity because they are not recorded in our data sheet.
What materials is a guillotine shear suitable for?
For cutting flat sheet metal, mainly steel, in straight cuts. It is not suitable for sections or tubes. The maximum thickness depends on the model and is not recorded in our data sheet for this unit, so it should be confirmed before purchase. Our service engineers can advise you on its actual capacity.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Sheet metal cutter Somme · Ref. 049169
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.