Your Cart
Search used machines
DANOBAT
Saw Danobat CP 520 FHS
- Year
- 1998
- Weight
- 5,000 KG
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | CP520AFHS |
|---|---|
| Type | Band |
| Year | 1998 |
Dimensions, weight and connection
| Weight | 5,000 KG |
|---|
Other data
| Capacity | 520 |
|---|---|
| Drive | Automatic |
| Automatic feed | Yes |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Danobat CP520AFHS automatic bandsaw
The Danobat CP520AFHS is an automatic bandsaw with automatic feed, built in 1998 according to our data sheet. It is designed for cutting large-section bar and billets in forging, steel service centres and heavy machining shops.
Key strengths of the CP series
According to the trade press, the Danobat CP520AF has two prismatic guide columns on linear rails and a hydraulic vice that positions the material at the cutting length. A round-bar cutting capacity of 20 ½ inches (about 520 mm) is quoted, with a 2 ⅛-inch-wide blade.
Configuration of this unit
- Model: Danobat CP520AFHS (according to data sheet)
- Type: bandsaw
- Automatic drive and feed
- Year: 1998 (according to data sheet)
- Weight: 5,000 kg (according to data sheet)
Typical applications
Cutting large-diameter rounds, squares and sections in forging, steel service centres, mould making, heavy machinery and machining shops that prepare raw stock.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What cutting capacity does the Danobat CP 520 have?
Our data sheet gives a capacity of 520, with no unit. The trade press quotes a round-bar cut of 20 ½ inches, about 520 mm, for the CP520AF model. The exact capacity and configuration of our unit should be confirmed with Ferrotall before purchase.
What does it mean that the saw is automatic?
Our data sheet lists automatic drive and automatic feed: the machine advances the material to the programmed length, clamps it and makes the cut without the operator handling each piece. This reduces manual operations in repetitive cutting runs.
Which industries is this saw suited to?
Given its size and its weight of 5,000 kg according to the data sheet, it is a heavy-duty cutting machine. It is used in forging, steel service centres and shops that cut large-section billets and bars before machining. It is not a bench saw for occasional cuts of small sections.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Saw Danobat CP 520 FHS · Ref. 041421
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.