Your Cart
Search used machines
IBARMIA
Pillar drill Ibarmia A40
- Taper
- CM-4
- Spindle speed
- 61 to 1,169 rpm
- Power
- 2.2
- Weight
- 610
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | A-40 |
|---|---|
| Type | Pillar |
| Serial no. | 104-J |
Headstock and spindle
| Taper | CM-4 |
|---|---|
| Min. / max. spindle-to-column distance | 385 |
| Main motor power | 2.2 |
| Speeds | 61 to 1,169 rpm |
Turning
| Drill chuck | Fitted to the spindle |
|---|
Dimensions, weight and connection
| Overall dimensions | 1,200 x 600 x 2,300 |
|---|---|
| Weight | 610 |
Other data
| Drilling capacity | 40 |
|---|---|
| Transmission | Gears |
| Feeds | 0.10 to 0.40 mm/rev |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Ibarmia A-40 pillar drill
Ibarmia pillar drill with geared head, adjustable T-slotted table and slotted cast iron base. It is designed for drilling medium-sized parts in machine shops, fabrication shops and maintenance departments.
Plate data
The head plate gives model A-40 and no. 104-J. The speed chart for the two levers shows values from 61 to 1,169 rpm, and the drilling plate gives rpm and feed by drill diameter, from 10 to 40 mm, in steel, cast iron, bronze and aluminium. The feed selector is marked from 0.10 to 0.40 mm per revolution.
Configuration of this unit
- Make and model: Ibarmia A-40, no. 104-J (plate)
- Type: pillar, gear transmission
- Drilling capacity: 40 mm
- Spindle taper: MT-4 (Morse 4)
- Spindle-to-column distance: 385 mm
- Overall dimensions: 1,200 x 600 x 2,300 mm
- Speeds from 61 to 1,169 rpm (plate)
- Feeds from 0.10 to 0.40 mm per revolution (plate)
- Drill chuck fitted to the spindle
- Compressed air hose
Typical applications
Drilling of steel, cast iron, bronze and aluminium in medium-sized parts, for general machining, light fabrication and industrial maintenance.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What speed range does the Ibarmia A-40 have?
The head plate shows spindle speeds from 61 to 1,169 rpm across the two levers. A second plate gives recommended rpm and feed according to drill diameter, from 10 to 40 mm, and material, which helps when choosing cutting conditions.
What drill diameter does it take?
Our data sheet gives a drilling capacity of 40 mm with a Morse 4 taper. The chart on the plate goes up to 40 mm diameter for steel, cast iron, bronze and aluminium, so it is suited to medium and large-diameter holes in workshop parts.
What is the distance between spindle and column?
According to the data sheet, the distance from the spindle axis to the column is 385 mm. This figure limits the size of part that can be drilled through the centre: a part resting on the table can be reached at positions up to that radius from the column axis.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Pillar drill Ibarmia A40 · Ref. 052615
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.