Your Cart
Search used machines
LAGUN
Milling machine Lagun FTV-4 SP
- Year
- 1997
- Power
- 4.8 kW
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Year of manufacture | 1997 |
|---|---|
| Serial no. | 40793 |
Headstock and spindle
| Total power | 4.8 kW |
|---|
Other data
| Digital readout (DRO) | Heidenhain, 3 axes |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is
The Lagun FTV-4 SP is a general-purpose turret milling machine for milling, drilling and boring one-off parts and short runs in general engineering, maintenance and toolroom workshops.
Model features
Listings for FTV-4 units quote an ISO 40 taper, a 1,372 x 280 mm table and travels of 800 x 345 x 400 mm. These are model data and have not been confirmed for this unit.
Configuration of this unit
- Plate: manufacturer Ladarasa S.L. (Vitoria), type FTV 4SP, serial no. 40793, total power 4.8 kW, year 1997 (some digits on the plate are unclear).
- Three-axis Heidenhain digital readout (X, Y, Z).
- Head with start/stop push-button panel.
- Protective covers on the table.
Typical applications
General engineering milling, drilling, boring, and maintenance and toolroom work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What digital readout does it have?
A three-axis Heidenhain readout (X, Y, Z), visible in the photos. It shows positions without relying on the graduated dials and is common on manual workshop milling machines.
What year is this Lagun FTV-4 SP?
The plate gives 1997 as the year of manufacture and serial number 40793, although some digits are unclear. We recommend confirming this during your visit before using it in any documentation. The machine is in Monforte del Cid (Alicante).
Is it a CNC milling machine?
There is no evidence of numerical control: a digital readout and manual controls can be seen. It is a conventional turret milling machine with digital readout, suitable for one-off parts and short runs.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Milling machine Lagun FTV-4 SP · Ref. 026097
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.