Your Cart
Search used machines
ANAYAK
Milling machine Anayak FV-4
- X/Y/Z travels
- 800 (X),400 (Y),500 (Z)
- Taper
- ISO 40 DIN 2080
- Spindle speed
- 50-2500
- Table
- 1340X305
- Power
- 3
- Weight
- 2050
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | FV-4 |
|---|---|
| Type | Turret |
Travels and table
| X, Y, Z travels | 800 (X),400 (Y),500 (Z) |
|---|---|
| Table dimensions | 1340X305 |
Headstock and spindle
| Taper | ISO 40 DIN 2080 |
|---|---|
| Main motor power | 3 |
| Spindle speed (rpm) | 50-2500 |
Dimensions, weight and connection
| Overall dimensions | 1800X2000X2080 |
|---|---|
| Weight | 2050 |
Other data
| Digital readout (DRO) | Fagor, 2-axis (X, Y) |
|---|---|
| Accessory | Machine vice on the table |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Anayak FV-4 turret milling machine
Conventional turret milling machine from the Spanish manufacturer Anayak, for machining workshop parts, tooling and maintenance work, with a vertical head and a long-travel table.
Key strengths of the model
According to the published information on the FV-4, it is a cast-iron turret milling machine with a swivelling head, suitable for vertical milling and, with accessories, horizontal milling. Since the sixties Anayak built turret machines based on the Bridgeport design.
Configuration of this unit
- Model: FV-4, turret type
- Travels: 800 mm (X), 400 mm (Y), 500 mm (Z)
- Table: 1,340 x 305 mm
- Taper: ISO 40 DIN 2080
- Head speeds: 50 to 2,500 rpm
- Overall dimensions: 1,800 x 2,000 x 2,080 mm
- Two-axis Fagor digital readout, X and Y
- Machine vice on the table
Typical applications
Face milling, squaring, slotting and precision drilling on one-off parts and short runs.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What travels does the Anayak FV-4 have?
Our data sheet gives 800 mm in X, 400 mm in Y and 500 mm in Z, with a 1,340 x 305 mm table. The spindle taper is ISO 40 to DIN 2080 and head speeds range from 50 to 2,500 rpm.
Does it have a digital readout?
Yes, the photos show a Fagor readout displaying two axes, X and Y, mounted on an arm at the side of the head. We cannot see a Z-axis display. It makes positioning easier without relying solely on the handwheel dials.
Is it a CNC milling machine?
No. It is a conventional turret milling machine, operated with handwheels and levers, with a digital readout. It is suited to one-off parts, repairs and machining work where programming a CNC machine is not worthwhile. Our service engineers can advise you on the readout and on preparing the machine for your workshop.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Milling machine Anayak FV-4 · Ref. 028363
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.