Your Cart
Search used machines
QUASER
Machining centre Quaser MV 204IIE/10
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
Travels and table
| Axis acceleration | 7 m/s2 |
|---|
Headstock and spindle
| Spindle range | 750-10,000 min-1 constant power |
|---|---|
| Spindle system | BIG-PLUS label |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Quaser MV 204IIE/10 vertical machining centre
Quaser vertical machining centre, model MV 204IIE/10 according to the marking on the front, with full enclosure and double door. It is suited to machining steel, aluminium and cast iron parts in toolmaking, mould and subcontract machining shops.
Key strengths of the series
According to listings for other MV 204 II units, the series has table travels of 1,020, 610 and 560 mm in X, Y and Z, with a BT40 spindle of up to 10,000 rpm and Fanuc control; these are series data, not confirmed on this unit.
Configuration of this unit
- Marked model: MV 204IIE/10
- Spindle range, as marked: 750-10,000 min-1, constant power
- Axis acceleration, as marked: 7 m/s2
- BIG-PLUS label visible on the front
- Control console with screen and swivelling operator panel
- T-slotted table
Typical applications
Milling, drilling and tapping of prismatic parts in short or medium batches.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What spindle speed range does this Quaser have?
The marking on the front of the machine states 750-10,000 min-1 with a constant-power spindle, and 7 m/s2 axis acceleration. This range allows roughing in steel at low speed and finishing or aluminium work at high speed. For any other data, please contact us.
What does the BIG-PLUS label mean?
BIG-PLUS is a dual-contact system between taper and spindle face that improves the rigidity and repeatability of the toolholder. The label appears on the enclosure of this machine. The exact taper type of this unit should be confirmed with the machine in front of you or with us.
What parts can a vertical machining centre like this one machine?
A vertical machining centre works on prismatic parts clamped to the table, with rotating tools removing material in three axes. It is suitable for moulds, tooling, flanges and mechanical components. The maximum part size depends on the travels, which are not given on our data sheet and which we will confirm.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Quaser MV 204IIE/10 · Ref. 021267
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.