Your Cart
Search used machines
Machining centre Pinnacle LV105
- Year
- 2016
- Control
- FANUC 0i-MF
- X/Y/Z travels
- 1020X560X560
- Taper
- BBT-40
- Spindle speed
- 12000
- Table
- 1200X510
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | LV105 |
|---|---|
| Control | FANUC 0i-MF |
| Year | 2016 |
| Swarf conveyor (type) | Yes, visible |
Travels and table
| Table dimensions | 1200X510 |
|---|---|
| X, Y, Z travels | 1020X560X560 |
Headstock and spindle
| Taper | BBT-40 |
|---|---|
| Spindle speed (rpm) | 12000 |
Tooling and equipment
| Through-tool coolant | Yes |
|---|---|
| Tool changer | 24 POCKETS |
Dimensions, weight and connection
| Overall dimensions | 2600X2650X2280 |
|---|
Other data
| Swarf conveyor | Yes |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Pinnacle LV105 machining centre
The Pinnacle LV105 is a medium-sized vertical machining centre with 1,020 x 560 x 560 mm travels and a 1,200 x 510 mm table, suited to producing mould parts, tooling and mechanical components in steel, aluminium and cast iron.
Strengths
The LV105 specification sheet shown in the photos (it has no serial number, so it only describes the model) mentions linear roller guideways, pneumatic headstock counterbalance and 4th-axis preparation without motor or drive; there is no record that this unit has these features. According to our data sheet, the control is a Fanuc 0i-MF, and the photos show the control console with screen.
Configuration of this unit
- Model: LV105
- Control: Fanuc 0i-MF (according to our data sheet)
- X, Y, Z travels: 1,020 x 560 x 560 mm
- Table: 1,200 x 510 mm
- BBT-40 taper; spindle up to 12,000 rpm
- 24-pocket tool changer
- Through-tool coolant
- Swarf conveyor (visible in the photos)
- Year: 2016; overall dimensions: 2,600 x 2,650 x 2,280 mm
Typical applications
Machining of moulds, dies, tooling parts, automotive components and general engineering parts.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What control does the Pinnacle LV105 have?
According to our data sheet, the control is a Fanuc 0i-MF. The LV105 specification sheet shown in our photos, which has no serial number, lists the same control with a 10.4-inch TFT colour screen and high-speed machining functions as standard equipment for the model. Contact us if you need to confirm which options are active on this unit.
What size of part does it take?
The travels are 1,020 mm in X, 560 mm in Y and 560 mm in Z, and the table measures 1,200 x 510 mm. It suits medium-sized parts and clamping several small parts on the same table in a single set-up.
Can a fourth axis be added?
The LV105 specification sheet states fourth-axis preparation, without drive or motor, but there is no record that this particular unit has it. If you are interested, contact us and we will assess with our service engineers what would need to be added and how to integrate it with the control.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Pinnacle LV105 · Ref. 060228
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.