Your Cart
Search used machines
MORI SEIKI
Machining centre Mori Seiki DV-5080
- Year
- 2007
- Spindle speed
- 10,000
- Tools
- Ø 125 mm, 8 kg, 12 N·m
- Weight
- 6,100 kg
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | DV-5080 |
|---|---|
| Year | 2007 |
| Model (plate) | DuraVertical 5080 |
Headstock and spindle
| Spindle speed (rpm) | 10,000 |
|---|
Tooling and equipment
| Max. tool | Ø 125 mm, 8 kg, 12 N·m |
|---|
Dimensions, weight and connection
| Weight | 6,100 kg |
|---|
Other data
| Rotary unit | Rotary table/unit with jaw chuck |
|---|---|
| Swarf conveyor | Yes |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Mori Seiki DuraVertical 5080 vertical machining centre
The Mori Seiki DuraVertical 5080 is a vertical machining centre from the Japanese manufacturer Mori Seiki (machine plate: Nagoya, Japan), with a spindle of up to 10,000 rpm. It is used for small and medium-sized precision engineering parts, tooling and moderately complex batches.
Key strengths
The tool data on the plate state a maximum diameter of 125 mm, a maximum weight of 8 kg and a maximum moment of 12 N·m. The panel has a Mori Seiki screen and alphanumeric keyboard, and the machine has a swarf conveyor on one side.
Configuration of this unit
- Model DuraVertical 5080 (plate), year 2007
- Spindle up to 10,000 rpm (plate)
- Max. tool diameter: 125 mm; max. weight: 8 kg; max. moment: 12 N·m (plate)
- Mori Seiki control with screen and alphanumeric keyboard
- Rotary unit with jaw chuck on the table
- Swarf conveyor
- Machine weight: 6,100 kg; power supply 200 V and 27 kVA (plate)
Typical applications
Machining of aluminium, steel and cast iron parts in short and medium runs, with operations on several faces thanks to the rotary unit.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What spindle speed does the DuraVertical 5080 have?
The machine plate states a maximum spindle speed of 10,000 rpm, with a maximum tool diameter of 125 mm, a maximum tool weight of 8 kg and a maximum moment of 12 N·m. These figures are for our unit and are useful for planning tooling and tool changes.
Does it have a rotary axis?
The photos show a rotary unit with a jaw chuck on the table, which allows several faces of the part to be machined in a single set-up. We will confirm the model and specifications of that unit, along with the other accessories included, before the purchase is finalised.
What year is it and how much does it weigh?
According to the machine's rating plate, it was built in 2007 and weighs 6,100 kg. The plate also states a rated power of 27 kVA and a 200 V supply. These figures should be taken into account for transport, the foundation and the electrical installation.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Mori Seiki DV-5080 · Ref. 046698
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.