Your Cart
Search used machines
KONDIA
Machining centre Kondia B-1000
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | KONDIA B-1000 |
|---|
Other data
| Swarf conveyor | side-mounted |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Kondia B-1000 vertical machining centre
Kondia vertical machining centre, model B-1000 as confirmed by the plate on the head, with full enclosure and swarf conveyor. It is used for milling, drilling and tapping prismatic parts in machining and toolmaking shops.
Key strengths of the series
According to an advert for another unit, the B-1000 has travels of 1,000, 400 and 510 mm in X, Y and Z, and a BT40 spindle of up to 6,000 rpm; these figures come from another advert and have not been confirmed on this machine.
Configuration of this unit
- Kondia B-1000 plate on the head
- Kondia Elgoibar lettering on the enclosure
- Pedestal-mounted control console
- Side-mounted swarf conveyor
- T-slotted table with protective bellows
Typical applications
Machining of medium-sized parts in short runs and toolmaking work.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What travels does the Kondia B-1000 have?
Our data sheet does not list the travels. According to an advert for another unit of the same model, they would be 1,000 mm in X, 400 mm in Y and 510 mm in Z. This is external data and has not been confirmed on this machine; contact us and we will measure and confirm it for you.
Does it include a swarf conveyor?
The photos show a swarf conveyor on one side of the machine, which carries swarf out of the enclosure and makes cleaning and continuous work easier. Its condition and operation are not recorded: contact us to check it during a visit or on video.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Kondia B-1000 · Ref. 025282
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.