Your Cart
Search used machines
JOHNFORD
Machining centre Johnford VMC-1300
- Year
- 2000
- Control
- SELCA S3045P
- X/Y/Z travels
- (X) 1300 X (Y) 850 X (Z) 800
- Taper
- BT 40
- Table
- 1500X710
- Tools
- Column-mounted disc-type tool magazine
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | VMC-1300 |
|---|---|
| Control | SELCA S3045P |
| Year | 2000 |
Travels and table
| X, Y, Z travels | (X) 1300 X (Y) 850 X (Z) 800 |
|---|---|
| Table dimensions | 1500X710 |
Headstock and spindle
| Taper | BT 40 |
|---|
Tooling and equipment
| Tool changer | Column-mounted disc-type tool magazine |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Johnford VMC-1300 vertical machining centre
The Johnford VMC-1300 is a vertical machining centre with a long X travel, suited to milling long and medium-sized parts in subcontract, toolmaking and general engineering shops. Its 1,500 x 710 mm table takes several parts at once or long assemblies.
Key strengths
According to the manufacturer's catalogue, the VMC-1300 series offers 15 m/min rapid traverse, an 80 to 8,000 rpm spindle with automatic gear range change and a 24-tool automatic tool changer. The column-mounted disc-type tool magazine can be seen in the photos of this unit.
Configuration of this unit
- Model: VMC-1300
- Control: Selca S3045P
- X, Y, Z travels: 1,300 x 850 x 800 mm
- Table: 1,500 x 710 mm
- Taper: BT 40
- Year: 2000
- Column-mounted disc-type tool changer (visible in the photos)
- Status beacon and side guard doors
Typical applications
Milling of long parts, beds, plates, fixtures and machinery components in steel, cast iron and aluminium; medium-batch machining with several parts on the same table.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What travels and table does the Johnford VMC-1300 have?
According to our data sheet, the travels are 1,300 mm in X, 850 mm in Y and 800 mm in Z, with a 1,500 x 710 mm table. This capacity suits long parts or fixing several parts on the same table. To check a specific part, send us its drawing and we will confirm the dimensions.
Which CNC control does this unit have?
Our data sheet lists a Selca S3045P control, a CNC control of Italian origin. Selca is a less common make than Fanuc or Heidenhain, so it is worth discussing programming and support with us before deciding. Our service engineers can tell you exactly what is possible.
Which tool taper does it use?
According to our data sheet, the spindle taper is BT 40, a very widespread standard on medium-sized machining centres. This makes toolholders and tools easy to source. The number of tools in the magazine is not listed in our data sheet; we will confirm it with you before your visit.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Johnford VMC-1300 · Ref. 040841
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.