Your Cart
Search used machines
Machining centre Hermle U 630 T
- Year
- 1998
- Control
- HEIDENHAIN 410
- X/Y/Z travels
- (X) 630, (Y) 500, (Z) 500
- Taper
- ISO 40
- Spindle speed
- 7000
- Table
- 900x528
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | U 630 T |
|---|---|
| Control | HEIDENHAIN 410 |
| Year | 1998 |
Travels and table
| Table dimensions | 900x528 |
|---|---|
| X, Y, Z travels | (X) 630, (Y) 500, (Z) 500 |
Headstock and spindle
| Taper | ISO 40 |
|---|---|
| Spindle speed (rpm) | 7000 |
Tooling and equipment
| Through-tool coolant | No |
|---|---|
| Tool changer | Up to 16 |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Hermle U 630 T vertical machining centre
The Hermle U 630 T is a vertical machining centre from the German manufacturer Hermle, designed for milling medium-sized parts in toolmaking, moulds, precision engineering and short or medium runs. Its 900 x 528 mm table and 630 x 500 x 500 mm travels cover most workshop parts.
Key strengths
According to listings for other units of the same model, the U 630 T is offered with a 20 to 7,000 rpm spindle, a 16-tool magazine and a Heidenhain TNC 410 control, a conversational control widely used in milling shops that makes it easy to program on the shop floor without relying on a CAM department.
Configuration of this unit
- Model: U 630 T
- Control: Heidenhain 410
- Table: 900 x 528 mm
- X, Y, Z travels: 630 x 500 x 500 mm
- Taper: ISO 40
- Spindle speed: 7,000 rpm
- Through-tool coolant: no
- Tool changer: up to 16 tools
- Year: 1998
- Enclosed cabin with guard doors (visible in the photos)
Typical applications
Milling of small and medium-sized moulds and dies, tooling parts, machine components and precision work in steel, cast iron and aluminium with ISO 40 taper tools.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What size of workpiece does the Hermle U 630 T accept?
According to our data sheet, the table measures 900 x 528 mm and the travels are 630 mm in X, 500 mm in Y and 500 mm in Z. This allows machining of medium-sized parts such as mould components, fixtures or machine parts. For specific parts, contact us and we will check the dimensions against your drawing.
Which CNC control does this machine have?
Our data sheet states a Heidenhain 410 control. It belongs to Heidenhain's TNC family, known for its plain-language conversational programming, which lets you write programs directly at the machine. We will confirm with you the specific features of the control on this unit.
Does it have through-spindle coolant?
No. According to our data sheet, this unit does not have through-tool coolant. If your work requires deep-hole drilling with internal coolant, bear this in mind when assessing the model; contact us if you need to compare it with other machines in our stock.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Hermle U 630 T · Ref. 037153
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.