Your Cart
Search used machines
CINCINNATI
Machining centre Cincinnati EV-750
- Year
- 1992
- Control
- FANUC 0-MC
- X/Y/Z travels
- 762 x 381 x 508
- Taper
- ISO 40
- Spindle speed
- 60-8000
- Table
- 865 x 432
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | EV-750 |
|---|---|
| Control | FANUC 0-MC |
| Year | 1992 |
| Control | GE Fanuc Series 0-M (screen) |
Travels and table
| Table dimensions | 865 x 432 |
|---|---|
| X, Y, Z travels | 762 x 381 x 508 |
Headstock and spindle
| Taper | ISO 40 |
|---|---|
| Spindle speed (rpm) | 60-8000 |
Tooling and equipment
| Through-tool coolant | No |
|---|---|
| Tool changer | 21 positions |
Dimensions, weight and connection
| Weight | 3700 KG |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Cincinnati EV-750 machining centre
The Cincinnati EV-750 is a vertical machining centre from the 1990s with medium travels, suited to general engineering and small to medium-sized parts.
Key strengths
According to the EV-750 specification manual, the tool changer holds 21 tools, the spindle runs from 60 to 8,000 rpm and rapid traverses reach 12 m/min. These are model data, not measurements taken on this unit.
Configuration of this unit
- Year: 1992
- GE Fanuc control, 0-M series shown on the screen; data sheet: Fanuc 0-MC
- Table: 865 x 432 mm; X/Y/Z travels: 762 x 381 x 508 mm
- ISO 40 taper; spindle 60-8,000 rpm
- 21-position tool changer
- No through-tool coolant
- Weight: 3,700 kg according to data sheet
Typical applications
Milling, drilling and boring of steel, cast iron and aluminium parts in general engineering, toolmaking and repair shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What travels does the Cincinnati EV-750 have?
Our data sheet lists 762 mm in X, 381 mm in Y and 508 mm in Z, with an 865 x 432 mm table. These are typical sizes for small and medium-sized parts in general engineering. If you have a specific part, send us its dimensions and we will confirm whether it fits.
Which control does this machine have?
The unit's screen shows a GE Fanuc 0-M series control, and our data sheet lists it as Fanuc 0-MC. It is a very widespread control on machines from the nineties, with plenty of documentation and technical support available on the market.
What spindle taper does it have and how many tools does it take?
Our data sheet indicates an ISO 40 taper and a 21-position changer, with a spindle speed of 60 to 8,000 rpm. ISO 40 is a very common taper on medium-sized vertical machining centres, so compatible toolholders are easy to find.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Cincinnati EV-750 · Ref. 030333
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.