Your Cart
Search used machines
CINCINNATI
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
| Model | ARROW 2 1000 |
|---|---|
| Control | SIEMENS |
| Year | 2002 |
| Table dimensions | 1120 x 510mm |
|---|---|
| X, Y, Z travels | 1016 x 510 x 558mm |
| Taper | DIN 40 |
|---|---|
| Spindle speed (rpm) | 6000 |
| Tool changer | 21 positions |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Cincinnati Arrow 2 1000 three-axis vertical machining centre for machining medium-sized prismatic parts in steel, cast iron and aluminium. It is a common machine in subcontract shops and toolrooms.
Market listings for the Cincinnati Arrow 1000 series describe a vertical machine with a 1,120 mm table and travels of around 1,020 x 510 x 560 mm, which match those in our records. Its automatic tool changer and long X travel make it well suited to short and medium runs.
Moulds and tooling, machinery and automotive parts, blocks and plates with drilling, tapping and 2D and 3D milling, for both one-off parts and short runs.
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
According to our records, the table measures 1,120 x 510 mm and the travels are 1,016 mm in X, 510 mm in Y and 558 mm in Z. This allows prismatic parts up to just over a metre long, within the table load capacity, which should be checked.
Our records for this unit show a 21-position tool changer and a DIN 40 taper. The number of positions determines how many different operations can be chained without stopping the machine. Contact us if you need to know the toolholder type or the compatible clamping system.
On a vertical machining centre the spindle works from above, which makes it easier to clamp and inspect flat parts, moulds and plates. Horizontal machines are more common for long runs with pallets and offer better swarf evacuation. The Arrow 2 1000 is vertical and is a good fit for medium-sized prismatic parts.
Loading similar machines…
New machinery from the brands we represent
Machining centre Cincinnati Arrow2 1000 · Ref. 038313
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.
We use cookies to measure visits and improve our ads. Cookie policy