Your Cart
Search used machines
CINCINNATI
Machining centre Cincinnati 750 Arrow 2
- Year
- 2003
- Control
- HEIDENHAIN 530 i TNC
- X/Y/Z travels
- (X) 750, (Y) 510, (Z) 510
- Taper
- BT-40
- Spindle speed
- 8,000
- Table
- 950x520
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | ARROW 750 |
|---|---|
| Control | HEIDENHAIN 530 i TNC |
| Year | 2003 |
| Series | Arrow2 (marking on the machine) |
| Control | Heidenhain (brand visible) |
Travels and table
| Table dimensions | 950x520 |
|---|---|
| X, Y, Z travels | (X) 750, (Y) 510, (Z) 510 |
Headstock and spindle
| Taper | BT-40 |
|---|---|
| Spindle speed (rpm) | 8,000 |
Tooling and equipment
| Tool changer | Umbrella-type |
|---|
Dimensions, weight and connection
| Overall dimensions | 2800 X 2400 X 2300 |
|---|---|
| Weight | 4,000 kg |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Cincinnati Arrow 750 machining centre
The Cincinnati Arrow 750, from the Arrow2 series as marked on the machine, is a compact vertical machining centre for medium-sized parts in general engineering, small moulds and tooling.
Key strengths
According to listings for the model, the Arrow 750 series has a 21-tool changer and a spindle of up to 8,000 rpm. Heidenhain controls stand out for their conversational programming and their contour machining capability.
Configuration of this unit
- Year: 2003
- Heidenhain control (visible on the screen); our records: 530 i TNC
- Table: 950 x 520 mm; X/Y/Z travels: 750 x 510 x 510 mm
- BT-40 taper; spindle up to 8,000 rpm
- Umbrella-type tool changer
- Enclosed cabin with front door
- Dimensions: 2,800 x 2,400 x 2,300 mm; weight 4,000 kg
Typical applications
Machining of aluminium and steel parts, machinery components, small moulds and short to medium runs in subcontract machining shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What are the travels of the Cincinnati Arrow 750?
Our records show 750 mm in X, 510 mm in Y and 510 mm in Z, with a 950 x 520 mm table. It is a common size for general engineering parts. To check a specific part, we recommend sending us its dimensions and weight.
Which control does it have?
The photos show a Heidenhain control, and our records list it as a 530 i TNC. Heidenhain controls are known for their conversational programming and for contour and surface machining, which speeds up the set-up of varied parts in the workshop.
What taper and tool changer does it have?
According to our records, the spindle is BT-40 with a speed of up to 8,000 rpm, and the tool changer is umbrella-type. The interior photo shows the changer disc to the side of the column. The BT-40 taper is one of the most widespread on medium-sized vertical machining centres.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Cincinnati 750 Arrow 2 · Ref. 039217
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.