Your Cart
Search used machines
BROTHER
Machining centre Brother TC--S2C-0
- Year
- 2006
- X/Y/Z travels
- 700 x 400 x 300
- Taper
- BT-30
- Spindle speed
- 12,000 rpm
- Table
- 800 x 320
- Tools
- Yes
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | TC-S2C-0 |
|---|---|
| Year | 2006 |
Travels and table
| Table dimensions | 800 x 320 |
|---|---|
| X, Y, Z travels | 700 x 400 x 300 |
Headstock and spindle
| Taper | BT-30 |
|---|---|
| Spindle speed (rpm) | 12,000 rpm |
Tooling and equipment
| Through-tool coolant | Yes |
|---|---|
| Tool changer | Disc-type |
Dimensions, weight and connection
| Overall dimensions | 2135 x 2844 x 2616 |
|---|---|
| Weight | 2500 |
Other data
| Swarf conveyor | Chain-type |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Brother TC-S2C-0 machining centre
The Brother TC-S2C-0 is a CNC drilling and tapping centre (‘CNC Tapping Center’, as marked on the machine) designed for small and medium-sized parts involving many drilling, tapping and light milling operations.
Key strengths
According to the manufacturer, the TC-S2C series is built around a high-speed BT30 spindle and a fast disc-type tool changer, designed to cut cycle times in series production. Through-spindle coolant helps with deep drilling and tapping.
Configuration of this unit
- Year: 2006
- Table: 800 x 320 mm; X/Y/Z travels: 700 x 400 x 300 mm
- BT-30 taper; spindle up to 12,000 rpm according to our data sheet
- Disc-type tool changer according to our data sheet
- Through-spindle coolant and chain-type swarf conveyor according to our data sheet
- Dimensions: 2,135 x 2,844 x 2,616 mm
Typical applications
Series production of automotive, hydraulic, electronic and precision engineering parts in aluminium, cast iron and steel.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is a tapping centre such as the Brother TC-S2C-0 used for?
It is designed for producing parts with many holes, tapped holes and light milling operations at high speed. Its BT30 spindle and disc-type changer allow short cycles in aluminium, cast iron and steel, on small and medium-sized parts within its 700 x 400 x 300 mm travels.
What workpiece size does it accept?
Our data sheet gives an 800 x 320 mm table and travels of 700 mm in X, 400 mm in Y and 300 mm in Z. This range suits small and medium-sized parts such as housings, flanges or brackets. To check a specific part, you can send us its dimensions.
What spindle taper and tool changer does it have?
Our data sheet lists a BT-30 taper, speeds of up to 12,000 rpm and a disc-type tool changer. The BT30 taper is common on high-speed tapping machines and takes light toolholders that change very quickly. The exact capacity of the changer is best confirmed during a visit.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
New machinery from the brands we represent
Would you prefer an equivalent new machine?
If we don't have it, we'll find it
Machining centre Brother TC--S2C-0 · Ref. 028298
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.