Your Cart
Search used machines
Lathe TOS SN 50C
- Distance between centres
- 2000
- Spindle speed
- SN 50, 22.4 to 2,000 rpm
- Table
- metric, inch, module and diametral pitch
- Weight
- 1890
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | SN 50 C |
|---|
Travels and table
| Thread tables | metric, inch, module and diametral pitch |
|---|
Headstock and spindle
| Speed plate | SN 50, 22.4 to 2,000 rpm |
|---|
Turning
| Distance between centres | 2000 |
|---|---|
| Chuck | three-jaw |
Dimensions, weight and connection
| Overall dimensions | 3150 x 1100 x 1505 |
|---|---|
| Weight | 1890 |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
TOS SN 50 C centre lathe
The TOS SN 50 C is a universal lathe from the SN series, with 2,000 mm between centres according to our data sheet. According to the manufacturer, it is designed for one-off and small-batch production, as well as for repair and maintenance workshops.
Key strengths of the SN 50 C series
According to the manufacturer's documentation, it is characterised by a wide range of spindle speeds and a stable construction. The plate photographed on our unit reads “SN 50”, with speeds from 22.4 to 2,000 rpm.
Configuration of this unit
- Model: TOS SN 50 C (according to data sheet; plate reads “SN 50” in the photos)
- Distance between centres: 2,000 mm
- Speeds according to plate: 22.4 to 2,000 rpm
- Thread tables for metric, inch, module and diametral pitch threads
- Overall dimensions: 3,150 x 1,100 x 1,505 mm
- Three-jaw chuck
- Turret toolpost and tailstock
Typical applications
Turning of shafts, bushes and general engineering parts in maintenance and repair workshops and short-run production.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What spindle speeds does the TOS SN 50 C have?
The plate photographed on our unit reads “SN 50” and gives speeds from 22.4 up to 2,000 rpm. This range covers parts of different diameters, from roughing to finishing. The machine is conventional, without numerical control, and is operated with levers and handwheels.
What workpiece length does it take?
According to our data sheet, 2,000 mm between centres, with overall machine dimensions of 3,150 x 1,100 x 1,505 mm. The swing and spindle bore are not given on the data sheet for this unit; please contact us for these.
What types of thread can it cut?
The tables on the feed gearbox show metric, inch, module and diametral pitch threads, covering the standards commonly used in maintenance and general machining workshops. The photographed tables also include the SN 40 columns, so we advise confirming the exact configuration of this unit with our team.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe TOS SN 50C · Ref. 049174
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.