Your Cart
Search used machines
PINACHO
Lathe Pinacho SP180
- Year
- 1999
- Swing over bed
- 360
- Distance between centres
- 1000
- Spindle speed
- 60 - 2000
- Tools
- 4-way toolpost
- Power
- 3
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | SP-180 |
|---|---|
| Year | 1999 |
Headstock and spindle
| Spindle bore | 42 |
|---|---|
| rpm | 60 - 2000 |
| Main motor power | 3 |
Turning
| Distance between centres | 1000 |
|---|---|
| Swing over bed | 360 |
| Swing in gap | 520 |
| Swing over cross slide | 335 |
| Chuck | Three-jaw chuck with guard |
| Tailstock | Tailstock with drill chuck |
Tooling and equipment
| Toolpost | 4-way toolpost |
|---|---|
| Coolant | Coolant hose |
Dimensions, weight and connection
| Overall dimensions | 2050 x 1485 x 820 |
|---|---|
| Weight | 785 |
Other data
| Bed width | 250 |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Pinacho SP-180 centre lathe
Conventional centre lathe from the Spanish manufacturer Pinacho, suited to maintenance and toolroom work and to small batches of turned, threaded and drilled parts.
Key strengths of the series
According to the manufacturer's documentation, the SP-180 series combines a centre height of 180 mm with a distance between centres of 750 or 1,000 mm and a spindle speed range of 60 to 2,000 rpm. A thread and feed chart is marked on the front of the machine.
Configuration of this unit
- Model: Pinacho SP-180 (marked SP/180 on the front)
- Year: 1999
- Distance between centres: 1,000 mm
- Main spindle bore: 42 mm
- Swing over bed: 360 mm; in gap: 520 mm; over cross slide: 335 mm
- Bed width: 250 mm
- Spindle speeds: 60 to 2,000 rpm
- Overall dimensions: 2,050 x 1,485 x 820 mm
- Three-jaw chuck and chuck guard
- Four-way toolpost and tailstock with drill chuck
- Coolant hose
Typical applications
Turning shafts, bushes and flanges, facing, threading and repairs in machine shops and industrial maintenance.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What workpiece length does this Pinacho SP-180 accept?
Our data sheet gives 1,000 mm between centres, so it takes workpieces up to that length between the headstock centre and the tailstock. Swing over the bed is 360 mm, rising to 520 mm with the gap removed. The main spindle bore is 42 mm, useful for passing bar stock.
Is it a CNC lathe?
No. It is a conventional centre lathe, operated with handwheels and levers. The photos show no digital readout or numerical control. It suits one-off parts, repairs and short runs, where programming a CNC machine does not pay off. If you need to automate repeat parts, a CNC lathe is worth considering.
What spindle speed range does it have?
Our data sheet lists a range of 60 to 2,000 rpm. According to the manufacturer's documentation for the SP series, the spindle has nine speeds within that range. Speeds are selected with the headstock levers, which are marked on the front of the machine.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe Pinacho SP180 · Ref. 043202
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.