Your Cart
Search used machines
PINACHO
Lathe Pinacho S90/285-155
- Year
- 2001
- Swing over bed
- 580
- Distance between centres
- 3000
- Spindle speed
- 12-750
- Power
- 7.5 KW
- Weight
- 2650 Kg.
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | S-90 285-155 |
|---|---|
| Year | 2001 |
| Model on front plate | S-90/285-155 |
Headstock and spindle
| Spindle bore | 155 |
|---|---|
| rpm | 12-750 |
| Main motor power | 7.5 KW |
Turning
| Distance between centres | 3000 |
|---|---|
| Swing over bed | 580 |
| Swing in gap | 830 |
| Swing over cross slide | 525 |
| Chuck | Three-jaw |
| Steady rest and tailstock | fitted |
Dimensions, weight and connection
| Overall dimensions | 4600 x 1100 x 1845 |
|---|---|
| Weight | 2650 Kg. |
Other data
| Bed width | 350 |
|---|---|
| Digital readout (DRO) | Fagor |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Pinacho S-90/285-155 centre lathe
The Pinacho S-90/285-155 is a centre lathe from 2001 according to our data sheet, with 3,000 mm between centres and a 155 mm spindle bore. It takes thick bar and tube as well as long workpieces.
Key features
The 155 mm spindle bore allows large-diameter tubular parts to pass through the headstock. The front plate reads «S-90/285-155», and the unit is fitted with a Fagor digital readout, a three-jaw chuck, a fixed steady rest and a chuck guard.
Configuration of this unit
- Model: Pinacho S-90/285-155 (front plate)
- Year: 2001 (according to data sheet)
- Distance between centres: 3,000 mm
- Spindle bore: 155 mm
- Swing over bed: 580 mm; in gap: 830 mm; over cross slide: 525 mm
- Bed width: 350 mm
- Speeds: 12 to 750 rpm
- Main motor power: 7.5 kW
- Overall dimensions: 4,600 x 1,100 x 1,845 mm
- Weight: 2,650 kg
- Fagor digital readout
- Three-jaw chuck, fixed steady rest and tailstock, chuck guard with window
Typical applications
Turning long shafts and large-diameter tubes or hollow parts in machine shops, heavy engineering and maintenance.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What bar diameter passes through the spindle?
According to our data sheet, the spindle bore is 155 mm. This is the maximum bar or tube diameter that can pass through the headstock, which is useful for thick tubular parts. It is an unusual figure for mid-range centre lathes, which normally have considerably smaller bores.
What spindle speeds does it have?
The data sheet gives 12 to 750 rpm and 7.5 kW of power, a range designed for large-diameter, heavy workpieces. For high-speed finishing on small diameters, this is not the most suitable machine.
What are the size and weight of the machine?
According to the data sheet it measures 4,600 x 1,100 x 1,845 mm and weighs 2,650 kg, with 3,000 mm between centres. Our service engineers take care of transport, installation and commissioning at your premises.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe Pinacho S90/285-155 · Ref. 050849
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.