Your Cart
Search used machines
Lathe Pinacho S90/260 x 1625
- Swing over bed
- 530
- Distance between centres
- 1650
- Spindle speed
- 30-1500
- Tools
- Fitted
- Power
- 5.5
- Weight
- 1970
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | S-90/260 |
|---|
Headstock and spindle
| Spindle bore | 68 |
|---|---|
| rpm | 30-1500 |
| Main motor power | 5.5 |
Turning
| Distance between centres | 1650 |
|---|---|
| Swing over bed | 530 |
| Swing in gap | 780 |
| Swing over cross slide | 475 |
| Toolpost turret | Fitted |
Dimensions, weight and connection
| Overall dimensions | 1925x2860x2860 |
|---|---|
| Weight | 1970 |
Other data
| Bed width | 350 |
|---|---|
| Headstock plate | Pinacho S-90/260 |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Pinacho S-90/260 centre lathe
The larger centre lathe in the Pinacho S-90 series, with 530 mm swing over bed, 780 mm in the gap and a 68 mm spindle bore. It is a machine for long shafts and heavy parts in general machining and maintenance.
Visible equipment
The headstock plate is marked «S-90/260» and carries the thread tables for metric, Whitworth, module and diametral pitch. A toolpost turret, a carriage with graduated handwheels and the tailstock can be seen.
Configuration of this unit
- Make and model: Pinacho S-90/260 (headstock plate)
- Distance between centres: 1,650 mm
- Spindle bore: 68 mm
- Swing over bed: 530 mm; in gap: 780 mm; over cross slide: 475 mm
- Bed width: 350 mm
- Speeds: 30 to 1,500 rpm
- Toolpost turret
Typical applications
Turning of long shafts and larger-diameter parts, with threading to different standards, in general machining, boilermaking and maintenance.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What capacity does the Pinacho S-90/260 have?
The data sheet gives 1,650 mm between centres, 530 mm swing over bed, 780 mm in the gap and 475 mm over the cross slide, with a 68 mm spindle bore. The headstock plate confirms the S-90/260 model, which allows work on long shafts and large-diameter parts.
What speeds and threads does it offer?
The data sheet gives 30 to 1,500 rpm. The plate on the feed gearbox includes thread tables for metric, Whitworth, module and diametral pitch, with the lever combinations for each pitch. This allows threading to different standards in repair and maintenance work.
What spindle bore does it have, and what parts fit in the gap?
The spindle bore is 68 mm according to the data sheet, so large-diameter bar or tube can pass through the spindle. The swing in the gap is 780 mm, which allows larger-diameter parts to be mounted close to the chuck, although only over a short length.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe Pinacho S90/260 x 1625 · Ref. 037825
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.