Your Cart
Search used machines
PINACHO
Lathe Pinacho S90/200
- Year
- 1997
- Swing over bed
- 400
- Distance between centres
- 1150
- Spindle speed
- 40 - 2200
- Power
- 4
- Weight
- 900
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | S90/200 |
|---|---|
| Year | 1997 |
| Serial no. | 31724 |
| Manufacturer | Metosa, Castejón del Puente (Huesca) |
Headstock and spindle
| Spindle bore | 52 |
|---|---|
| rpm | 40 - 2200 |
| Main motor power | 4 |
Turning
| Distance between centres | 1150 |
|---|---|
| Swing over bed | 400 |
| Swing in gap | 595 |
| Swing over cross slide | 210 |
| Chuck | Three-jaw |
| Turret | Four-way toolpost |
Dimensions, weight and connection
| Overall dimensions | 2170 x 950 x 1285 |
|---|---|
| Weight | 900 |
Other data
| Bed width | 300 |
|---|---|
| Guard | Front guard with window and emergency stop |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Pinacho S-90/200 centre lathe from 1997
The Pinacho S-90/200 is a conventional centre lathe built by Metosa (Castejón del Puente, Huesca) in 1997, according to its plate. This unit has 1,150 mm between centres, 400 mm swing over bed and 595 mm in the gap.
Key strengths
The headstock dial shows ranges A, B and C with speeds up to 2,200 rpm, and below it are the thread tables for metric, Whitworth, module and diametral pitch. The machine has a front guard with a window and an emergency stop button on the apron.
Configuration of this unit
- Model: S90-200, no. 31724, year 1997 (CE plate)
- Manufacturer: Metosa, Castejón del Puente (Huesca)
- Distance between centres: 1,150 mm
- Spindle bore: 52 mm
- Swing over bed: 400 mm
- Swing in gap: 595 mm
- Swing over cross slide: 210 mm
- Bed width: 300 mm
- Speeds: 40 to 2,200 rpm (according to data sheet)
- Three-jaw chuck and four-way toolpost
Typical applications
Turning, facing, drilling and threading of shafts, bushes and maintenance parts in general machining and toolmaking workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What size of part does the Pinacho S-90/200 take?
According to our data sheet, 1,150 mm between centres, 400 mm swing over bed, 595 mm in the gap and 210 mm over the cross slide. The spindle bore is 52 mm. It is a lathe for medium-length shafts, bushes and small to medium-sized workshop parts.
What year is it and what is its serial number?
The machine's CE plate gives the manufacturer as Metosa, of Castejón del Puente (Huesca), model S90-200, number 31724 and year 97. The Pinacho name is marked on the headstock. These are the details shown on the plate; the actual condition of the components should be checked during your visit.
What threads can it cut?
The tables below the headstock dial cover metric, Whitworth, module and diametral pitch threads, selected with the levers on the thread gearbox. This covers the usual metric and inch threads found in the workshop, as well as module threads. The available pitches are shown on the machine's own tables.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe Pinacho S90/200 · Ref. 055088
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.