Your Cart
Search used machines
PINACHO
Lathe Pinacho L8.200
- Swing over bed
- 400
- Distance between centres
- 1100
- Spindle speed
- 38 - 2200
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | L8,200 |
|---|---|
| Model on front plate | Mod. L-8/200 |
Headstock and spindle
| Spindle bore | 42 |
|---|---|
| rpm | 38 - 2200 |
Turning
| Distance between centres | 1100 |
|---|---|
| Swing over bed | 400 |
| Swing in gap | 600 |
| Swing over cross slide | 300 |
| Chuck | Three-jaw |
Dimensions, weight and connection
| Overall dimensions | 2200 x 1000 x 1600 |
|---|
Other data
| Bed width | 300 |
|---|---|
| Guards | Transparent chuck guard and side screen |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Pinacho L-8/200 centre lathe
The Pinacho L-8/200 is a medium-sized centre lathe with 1,100 mm between centres and 400 mm swing over bed. It is a workshop machine for turning small and medium-sized parts.
Key strengths
According to our data sheet, the spindle runs from 38 to 2,200 rpm, a wide range for working on anything from large to small diameters. The unit has a front plate marked ‘Mod. L-8/200’ and a table of metric, Whitworth and module threads.
Configuration of this unit
- Model: Pinacho L-8/200 (front plate)
- Distance between centres: 1,100 mm
- Spindle bore: 42 mm
- Swing over bed: 400 mm; in gap: 600 mm; over cross slide: 300 mm
- Bed width: 300 mm
- Speeds: 38 to 2,200 rpm
- Overall dimensions: 2,200 x 1,000 x 1,600 mm
- Three-jaw chuck
- Yellow transparent chuck guard and side splash screen
- Tailstock
Typical applications
Turning of shafts, bushes and general engineering parts in maintenance, toolroom and small-batch workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What workpiece size does the Pinacho L-8/200 accept?
According to our data sheet, 1,100 mm between centres, 400 mm swing over bed, 600 mm in the gap and 300 mm over the cross slide. The spindle bore is 42 mm, which is the maximum bar diameter that can pass through it.
What speed range does it have?
The data sheet states 38 to 2,200 rpm. The front plate on the headstock shows a table of speed ranges with values such as 575, 925, 1,150 and 2,200 rpm. This range covers both roughing on large diameters and finishing on small ones.
Is it a CNC lathe?
No. The photos show levers, handwheels and a front plate with thread tables, with no control screen or digital readout. It is a conventional, manually operated centre lathe, suitable for one-off work, repairs and short runs. The photos show the levers and the front plate, but not the state of wear.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe Pinacho L8.200 · Ref. 056610
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.