Your Cart
Search used machines
PINACHO
Lathe Pinacho L1-200 410X1000
- Swing over bed
- 410
- Distance between centres
- 1000
- Spindle speed
- 32 to 1,800 rpm
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | L1-200 |
|---|
Headstock and spindle
| Speeds | 32 to 1,800 rpm |
|---|
Turning
| Distance between centres | 1000 |
|---|---|
| Swing over bed | 410 |
Other data
| Headstock plate | Pinacho Mod. L-1/200 |
|---|---|
| Digital readout | SDS2L, X and Z axes |
| Transparent guard | Fitted |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Pinacho L-1/200 centre lathe
Centre lathe from the Pinacho L-1 series, with 1,000 mm between centres and 410 mm swing over bed. It is used in machining and maintenance workshops for shafts, bushes and medium-sized parts.
Visible equipment
The headstock plate is marked ‘Mod. L-1/200’ and shows speeds from 32 to 1,800 rpm in three ranges, along with metric, Whitworth and module thread tables. An SDS2L two-axis digital readout (X and Z) is mounted on the headstock. A toolpost turret, a three-jaw chuck and a transparent guard over the carriage can also be seen.
Configuration of this unit
- Make and model: Pinacho L-1/200 (headstock plate)
- Distance between centres: 1,000 mm
- Swing over bed: 410 mm
- SDS2L two-axis digital readout, X and Z
- Speeds from 32 to 1,800 rpm (plate)
- Transparent guard over the carriage
- Toolpost turret and three-jaw chuck
Typical applications
Turning and threading of shafts and bushes in general machining and maintenance, with position reading on the digital readout.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
Which digital readout does it have?
It has an SDS2L two-axis readout, X and Z, with a numeric keypad, mounted on the headstock. It makes turning to size easier by showing the position of the slides. We will check that it works during the visit before any commitment, as with the rest of the machine's equipment.
What spindle speeds can be read on the plate?
The headstock plate shows values from 32 to 1,800 rpm spread over three ranges, selected with levers. Each range is combined with a second selector lever, so the full table needs to be checked on the machine to find the rpm for each position.
What workpiece size does it accept?
According to the data sheet, 410 mm swing over bed and 1,000 mm between centres. Details such as the spindle bore, power and year are not recorded in our data sheet; we will confirm them on the machine before purchase so that you can assess whether it suits your parts.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe Pinacho L1-200 410X1000 · Ref. 030481
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.