Your Cart
Search used machines
Lathe Martin DLZ 502
- Distance between centres
- 3000
- Tools
- Yes
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | DLZ 502 |
|---|
Turning
| Distance between centres | 3000 |
|---|---|
| Toolpost turret | Yes |
Other data
| Headstock plate | K. MARTIN Offenburg |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used K. Martin DLZ 502 centre lathe
The DLZ 502 is a centre lathe from the German manufacturer K. Martin (Offenburg), as shown on the headstock plate, with 3,000 mm between centres according to our data sheet. It is a machine for turning long shafts and long turned parts in the workshop.
What the photos show
The headstock has a speed selector wheel and levers, and the carriage carries a toolpost turret; the leadscrew, the feed shaft and an orange chuck guard can be seen. The machine is shown with green guard panels resting loose next to the bed.
Configuration of this unit
- Make and model: K. Martin DLZ 502
- Distance between centres: 3,000 mm
- Toolpost turret and chuck guard (visible)
- Condition visible in photos: heavily worn paintwork and guard panels not fitted, resting next to the bed
Typical applications
Machining of long shafts, leadscrews and rolls, industrial maintenance and repair work, where a long bed and a sturdy general-purpose machine are needed.
See it at Ferrotall
The lathe is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What workpiece length does the K. Martin DLZ 502 take?
According to our data sheet, 3,000 mm between centres, which is the maximum workpiece length between chuck and tailstock. That is a long capacity, typical for long shafts and rolls. The data sheet gives no further dimensions. Contact us for the swing over bed.
What make is it and where does it come from?
The headstock plate shows K. Martin, Offenburg, a town in Baden (Germany). The name «martin» also appears on the feed gearbox. The model is called DLZ 502 and it is a centre lathe with leadscrew and feed shaft, with a carriage and toolpost turret.
Can I see the machine before buying it?
Yes. It is at our premises in Monforte del Cid (Alicante). The photos show guard panels resting out of place and worn paintwork, so we recommend visiting to assess its condition and the scope of any overhaul it may need.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe Martin DLZ 502 · Ref. 049855
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.