Your Cart
Search used machines
HELLER
Lathe Heller TPG6280 800X1500
- Tools
- 4-position turret
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
Turning
| Chuck | Jaw chuck |
|---|
Tooling and equipment
| Toolpost | 4-position turret |
|---|
Other data
| Steady rest | Fixed |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Heller TPG 800x1500 centre lathe
Large centre lathe with a long bed, steady rest and jaw chuck, for long, heavy parts in machine shops and industrial maintenance.
TPG series
Heller markets the TPG series as heavy-duty centre lathes. The marking on the headstock of this unit identifies the model as TPG 800x1500.
Configuration of this unit
- Make and model: Heller TPG 800x1500 (marking on the headstock with CE mark).
- Jaw chuck mounted on the spindle.
- Fixed steady rest and tailstock on the bed.
- Four-position toolpost on the carriage.
- Control panel with push buttons and mushroom-head emergency stop on the carriage.
- Adjustable work light.
Typical applications
OD turning, facing and threading of shafts, rolls, bushes and long parts for maintenance and one-off production.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What identifies the model of this lathe?
The marking on the headstock carries the Heller brand, the CE mark and the designation TPG 800x1500. That designation is the one we use as the model. Our data sheet does not record other technical data such as power, year or spindle bore; contact us and we will confirm them with the machine in front of us in Monforte del Cid.
What accessories can be seen in the photos?
The photos show the jaw chuck on the spindle, a fixed steady rest, a tailstock, the four-position toolpost turret and a work light. Please check with our team which accessories are included in the offer.
Who takes care of transport and commissioning?
Ferrotall's own service engineers handle transport, installation and commissioning. The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; you can also contact us to see it running or to receive a video before deciding.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Lathe Heller TPG6280 800X1500 · Ref. 014253
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.