Your Cart
Search used machines
GEKA
Ironworker Geka Microcrop-36
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Make and model | Geka Microcrop-36 |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Geka Microcrop-36 punch and shear
Geka Microcrop-36 punch and shear (ironworker), with its name marked on the front, combining punching, flat bar cutting and section cutting stations in a single machine.
Configuration of this unit
- Microcrop-36 and Geka markings on the front.
- Punching station on the left and flat bar blades with yellow holders.
- Angle (L-section) cutting station.
- Control panel with selector switch, push buttons and emergency stop button.
- Rating plate on the front, illegible.
- Dirty, worn paintwork; the actual condition cannot be assessed from the photos.
Typical applications
Punching and cutting of flat bar and angle sections in metal fabrication, plate work and structural steelwork.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What jobs can a combined punch and shear like this handle?
In a single machine it punches holes, cuts flat bar and cuts angle sections, each at its own station. The photos of this unit show the punching station, the flat bar blades and the angle station. These machines are common in metal fabrication, plate work and structural steelwork.
What cutting capacity does it have?
Our data sheet does not list flat bar and angle cutting capacities or the maximum punching diameter, and the plate cannot be read in the photos. We take no figure for granted: we check them on this unit and confirm them to you before quoting, together with the tooling available.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Ironworker Geka Microcrop-36 · Ref. 019021
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.