Your Cart
Search used machines
GAIRU
Ironworker Gairu
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
Other data
| Shearing capacity | 16 |
|---|---|
| Cutting capacities | sheet up to 16 mm; flat bar 60 x 25 mm; round bar up to 36 mm; square bar up to 30 mm |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is
Combined shearing and punching machine from Gairu, with a cast-iron frame, flywheels and mechanical drive. It is used for cutting sheet, flat bar, sections and round bar in steel, and for punching sheet with the appropriate attachments.
Key strengths
The specification sign fixed to the machine itself lists the manufacturer's cutting capacities. It is a very widely used machine in metalwork and plate fabrication because of its versatility: a single machine covers several section cutting operations.
Configuration of this unit
- Shearing capacity for steel sheet up to 16 mm (data sheet and sign)
- Sign: flat bar 60 x 25 mm and 100 x 18 mm in a single stroke; angles up to 85 x 13 mm; round bar up to 36 mm; square bar up to 30 mm
- With special attachments, according to the sign: angles, U-channels, joists and round bar up to 45 mm, punching and blanking of sheet
- Two flywheels and motor mounted on the frame
- Cast-iron pedestal
Typical applications
Metalwork, architectural metalwork, plate fabrication and structural steel shops where flat bar, angles, round bar and sections are cut and sheet is punched.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What sheet thickness does it cut?
The sign on the machine states that it cuts steel sheet up to 16 mm, which is also the figure in our data sheet. The values for sections, flat bar and round bar appear on the same sign. They are the manufacturer's design capacities and depend on the hardness of the material and the condition of the blades.
What is a punch and shear machine used for?
It combines sheet and section cutting with hole punching in a single machine. With the right tooling it can cut angles, U-channels, joists, flat bar and round bar, and punch sheet. It is common in metalwork and structural steel shops.
Can it cut sections as well as sheet?
Yes. The sign on the machine lists cuts for flat bar, angles, single T-sections, round bar and square bar. For window sections, angles, U-channels and joists it mentions special attachments, which do not necessarily come with the machine: it is worth confirming which tooling is supplied.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Ironworker Gairu · Ref. 024643
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.