Your Cart
Search used machines
AJIAL
Hydraulic swing-beam shear Ajial 4000X6
- Year
- 1981
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | AJIAL 4000X6 |
|---|---|
| Type | Hydraulic swing-beam |
| Year | 1981 |
| Model (plate) | 640 |
| Serial number | 81640101 |
| Manufacturer | H. J. de la Hija, S.A. (Ajial), Cornellà |
Dimensions, weight and connection
| Voltage | 220 V |
|---|
Other data
| Cutting length | 4000 mm |
|---|---|
| Sheet thickness | 6 |
| Backgauge | Motorised |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is
Hydraulic swing-beam guillotine shear from Ajial (H. J. de la Hija, S.A., Cornellà, Spain) for straight-line cutting of sheet metal. The plate on this unit gives model 640, capacity «6 x 4», number 81640101 and date 27-10-81. A sign fixed to the machine prohibits cutting material thicker than 4 mm.
Key strengths
On swing-beam shears the upper blade follows an arc, which reduces the cutting force and the distortion of the sheet compared with a straight cut. This unit has a motorised backgauge with a counter on the control desk, a cutting length selector and a locking key.
Configuration of this unit
- Model 640 according to the plate; data sheet: Ajial 4000x6
- Cutting length 4,000 mm (data sheet)
- Capacity «6 x 4» on the plate; the sign on the machine limits cutting to 4 mm thickness
- Year of manufacture: 1981, plate date 27-10-81
- Serial number 81640101
- Type: hydraulic swing-beam; Dowty pump according to the plate
- Motorised backgauge (data sheet)
- 220 V supply according to the plate
- Counter and cutting length selector on the control desk
Typical applications
Cutting sheet metal in plate fabrication, metalwork and architectural metalwork shops, and production of flat blanks.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What length and thickness does this shear cut?
The plate gives a capacity of «6 x 4» and our data sheet a cutting length of 4,000 mm. However, a sign on the machine itself prohibits cutting material thicker than 4 mm, so that is the limit shown on the unit and we do not promise 6 mm. Ask us about your specific material.
What is a swing-beam shear?
On a swing-beam shear the upper blade moves in an arc instead of coming down parallel to the lower blade. The cutting angle therefore changes during the stroke, which reduces the force required. It is a common system on long hydraulic shears for sheet metal.
Does it have a backgauge?
Yes. Our data sheet states a motorised backgauge, and the control desk has a counter and a cutting length selector. The plate also lists a «motor tope» (backgauge motor), so the gauge is driven electrically. It is worth checking that it works during your visit.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Hydraulic swing-beam shear Ajial 4000X6 · Ref. 036178
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.