Your Cart
Search used machines
HOYTOM
Hardness tester Hoyton
- Weight
- 115
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | 1003A |
|---|---|
| Model (plate) | 1003 A |
Dimensions, weight and connection
| Overall dimensions | 260 x 525 x 770 |
|---|---|
| Weight | 115 |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is
Bench hardness tester made by Hoytom, model 1003 A according to the plate on the dial face. It measures the hardness of metallic materials by indentation, with readings on an analogue dial.
Key strengths
It is a manually operated mechanical machine: handwheel on the table elevating screw to raise the workpiece, side lever for applying the load and a control marked «velocidad de penetración» (indentation speed) with slow and fast settings.
Configuration of this unit
- Model 1003 A, Hoytom Ltd
- Analogue dial with pointer and graduated scales
- Elevating screw with spoked handwheel and flat anvil
- Indentation speed control, slow and fast
- Wooden box next to the machine, contents not checked
- Blue open-frame stand
Typical applications
Hardness testing of parts, tools and materials in workshops, heat treatment shops and quality laboratories.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
Which model is the Hoytom hardness tester?
The plate on the dial face reads Hoytom Ltd, model 1003 A. It is a bench hardness tester with analogue reading, indentation speed control and manual elevating screw. The serial no. is not visible in the photos, nor are the loads or the reading scale, which must be confirmed during the visit.
Which hardness scale does it measure?
The photos do not allow us to identify the scale (Rockwell, Brinell or other) or the loads available. Listings for this model mention several test loads, but these are not data for this particular unit, so they must be confirmed during the visit.
Does it include indenters and test blocks?
There is a wooden box next to the machine, but we cannot vouch for its contents. If you need indenters, anvils or reference blocks for calibration, let us know and we will check before your visit and confirm, including the availability of separate accessories.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Hardness tester Hoyton · Ref. 055236
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.