Your Cart
Search used machines
DANOBAT
Grinding machine Danobat RT800
- Year
- 1976
- Weight
- 5,000 kg
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | RT-800 |
|---|---|
| Machine type | Surface (flat) |
| Year | 1976 |
Travels and table
| Max. grinding area | 800 x 550 x 450 mm |
|---|
Turning
| Magnetic chuck | Electromagnetic |
|---|
Dimensions, weight and connection
| Weight | 5,000 kg |
|---|
Other data
| Drive | Hydraulic |
|---|---|
| Front guard | Enclosure with windows |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Danobat RT-800 surface grinder
The Danobat RT-800 is a hydraulically driven surface grinder, designed for grinding plates, dies, tooling and maintenance parts with a good finish and flatness. According to listings for this model on machinery portals, the RT-800 has an 800 mm longitudinal travel and works with a magnetic chuck.
Configuration of this unit
- Model: RT-800 (marked on the machine)
- Year: 1976
- Drive: hydraulic
- Max. grinding area: 800 x 550 x 450 mm
- Chuck: electromagnetic
- Weight: 5,000 kg
- Front guard with windowed doors (visible in photo)
Typical applications
Surface grinding of mould bases, steel plates, gibs and tooling parts in machining and industrial maintenance workshops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What workpiece size does this grinder accept?
Our data sheet gives a maximum grinding area of 800 x 550 x 450 mm, with an electromagnetic chuck. The permissible load on the chuck and the actual usable height depend on the configuration, so it is best to check with us before defining the workpiece.
What is the advantage of hydraulic drive?
Hydraulic table drive gives a smooth, continuous feed with adjustable speed and stroke reversal, which helps achieve uniform flatness and finish on long parts.
What is an electromagnetic chuck used for?
It holds steel and cast iron parts magnetically, without clamps, so the entire top face can be ground without obstruction. It is switched on and off electrically, which speeds up workpiece changes.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Grinding machine Danobat RT800 · Ref. 041034
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.