Your Cart
Search used machines
ONA
EDM machine ONA Prima E-250
- Control
- ONA Prima control cabinet with screen and keyboard
- Weight
- 2340
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | F-250 |
|---|---|
| Control | ONA Prima control cabinet with screen and keyboard |
Dimensions, weight and connection
| Overall dimensions | 2418x2552x2133 |
|---|---|
| Weight | 2340 |
Other data
| Pump | Grundfos pump in the filtration circuit |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used ONA Prima F-250 wire EDM machine
Wire EDM machine from the Basque manufacturer ONA, Prima series, marked “PRIMA F-250” on the bed. It cuts contours and dies in hard conductive materials without cutting forces.
Why this type of machine is of interest
Wire EDM machines the workpiece by means of electrical discharges between a wire and the part, with high accuracy and no contact, including in hardened steels. ONA is a manufacturer with decades of experience in die-sinking and wire EDM.
Configuration of this unit
- Make: ONA, Prima series, marked F-250
- Type: wire EDM
- Overall dimensions: 2,418 x 2,552 x 2,133 mm; weight: 2,340 kg
- In the photos: ONA Prima control cabinet with screen, keyboard and emergency stop, wire head with spool and guide pulleys, work tank with windowed doors, filter tank and Grundfos pump
- Year, travels and power: not recorded; to be confirmed
Typical applications
Manufacture and repair of dies, press tools, punches and tooling, cutting of hardened steel parts and complex profiles in mould and die shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is a wire EDM machine?
It is a machine that cuts conductive materials with a fine metal wire and controlled electrical discharges, in a bath of dielectric fluid. It is used for dies, punches and hardened steel parts where exact contours are required without cutting forces.
Is it the ONA Prima E-250 or F-250?
The original listing title said E-250, but the marking on the machine itself in our photos reads “PRIMA F-250”. We have corrected the designation according to that marking. If you need confirmation for paperwork, our service engineers can check the plate.
How much does it weigh and how much space does it take up?
According to our data sheet, it weighs 2,340 kg and the overall dimensions are 2,418 x 2,552 x 2,133 mm. You should also allow space for the filter tank and the control cabinet, which appear in the photos as units separate from the bed.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
EDM machine ONA Prima E-250 · Ref. 034547
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.