Your Cart
Search used machines
ONA
EDM machine ONA Compac 30
- Weight
- 570
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | COMPAC 30 |
|---|
Dimensions, weight and connection
| Tank dimensions | 550x360x240 |
|---|---|
| Weight | 570 |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
ONA Compact 30 die-sinking EDM
The ONA Compact 30 is a die-sinking EDM machine with column-type head and work tank. The panel bears the ONA Compact 30 marking. It is used to erode cavities in hardened-steel moulds, dies and tooling.
Key strengths
According to the model data sheet (manufacturer's catalogue), the Compact 30 offers a 550 x 350 mm table, 300 mm longitudinal travel, 200 mm cross travel, 200 mm electrode holder travel, 45 A current and 3.5 kVA maximum power. These are catalogue data for the model, not confirmed on this unit.
Configuration of this unit
- Model: Compact 30
- Tank dimensions (data sheet): 550 x 360 x 240 mm; weight: 570 kg
- ONA control panel with push buttons and dial gauge
Typical applications
Eroding of mould cavities, stamping and press-tool dies, and repair of hardened-steel tooling.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is a die-sinking EDM machine used for?
It machines cavities in the shape of a copper or graphite electrode by means of electrical discharges under dielectric. It can work hardened steel and produce shapes that cannot be achieved with a cutter or other conventional tools. It is used in moulds, dies and tooling.
What capacity does the ONA Compact 30 have?
According to the model catalogue sheet, it has a 550 x 350 mm table, 300 x 200 mm travels, 200 mm electrode holder travel and 45 A current. These are model data, not data for this specific unit: the tank dimensions in our data sheet are 550 x 360 x 240 mm. Please confirm the details with our team.
What is the difference between die-sinking and wire EDM?
Die-sinking EDM uses an electrode shaped like the cavity to be produced. Wire EDM cuts with a fine metal wire along a programmed contour. The Compact 30 is a die-sinking machine: it is suited to blind cavities, not to through-profile cutting.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
EDM machine ONA Compac 30 · Ref. 025702
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.