Your Cart
Search used machines
EDM machine ONA B-230 Program
- Control
- ONA Program 30
- X/Y/Z travels
- (X) 200 (Y) 300
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | B-230 PROGRAM |
|---|---|
| Type | Die-sinking |
| Control | ONA Program 30 |
Travels and table
| Travels (mm) | (X) 200 (Y) 300 |
|---|---|
| Axis readout | X, Y, Z |
Dimensions, weight and connection
| Tank dimensions | 700 x 500 x 295 mm |
|---|
Other data
| Drive | Semi-control |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is
ONA B-230 die-sinking EDM machine with ONA Program 30 control. It is used to machine cavities and shapes in hardened steel and carbide by electrical discharge with an electrode, in moulds, dies and tooling.
Key strengths
ONA is a Spanish manufacturer of EDM machines. On this unit, the ONA Program 30 control cabinet houses the X, Y and Z axis readout and the erosion controls.
Configuration of this unit
- Make and model: ONA B-230
- Type: die-sinking EDM
- Control: ONA Program 30 with X, Y, Z axis readout
- Drive: semi-control, according to our data sheet
- Travels: X 200 mm, Y 300 mm
- Tank: 700 x 500 x 295 mm
- Separate control cabinet next to the machine
Typical applications
Production and repair of moulds, blanking dies, press tools and tooling in hard materials, and machining of shapes that cannot be produced by conventional milling.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What workpiece size does the ONA B-230 take?
According to our data sheet, the travels are 200 mm in X and 300 mm in Y, and the tank measures 700 x 500 x 295 mm. These dimensions limit the size of the block that fits submerged in the dielectric and the electrode positions.
What control does this EDM machine have?
The photos show the ONA Program 30 control, with X, Y and Z axis readout, and the head push-button panel. Our data sheet describes the drive as semi-control. Operation and erosion parameters are set from these panels.
What is die-sinking EDM used for?
It machines cavities in the shape of an electrode by means of electrical discharges under dielectric. It works hardened steel and carbide with no cutting forces and is used in moulds and dies with geometries that milling cannot reach. If you have questions about electrodes or dielectric, contact us before your visit.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
EDM machine ONA B-230 Program · Ref. 038300
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.