Your Cart
Search used machines
FANUC
EDM machine Fanuc Robocut Alpha 0iA
- Year
- 1999
- X/Y/Z travels
- 320 / 220 / 120 / 120 / 180 mm
- Weight
- 1.2 t
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | ALPHA 0iA |
|---|---|
| Type | Wire |
| Year | 1999 |
Travels and table
| X/Y/U/V/Z travels | 320 / 220 / 120 / 120 / 180 mm |
|---|
Dimensions, weight and connection
| Tank dimensions | 770x560 |
|---|---|
| Machine weight | 1.2 t |
| Max. workpiece weight | 250 kg |
Other data
| Drive | CNC |
|---|---|
| Electrode changer | No |
| Supply | 3-phase, 200/220 V, 50/60 Hz, 13 kVA |
| Plate date | 1999-9 |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Fanuc Robocut α-0iA wire EDM
CNC wire-cut machine for machining contours and profiles in hard conductive materials: blanking dies, punches, tooling and precision parts.
Rating plate data
The rating plate shows Fanuc Robocut α-0iA, date 1999-9, and the following data:
- Travels: X 320 mm, Y 220 mm, U 120 mm, V 120 mm and Z 180 mm
- Rapid traverse rates: 900 mm/min in X, Y and Z; 450 mm/min in U and V
- Max. workpiece weight: 250 kg
- Machine weight: 1.2 t
- Three-phase supply 200/220 V, 50/60 Hz, 13 kVA
Configuration of this unit
- Type: wire EDM with CNC drive
- Year: 1999
- Tank dimensions: 770 x 560 mm
- No electrode changer
- Wire spool and head with wire guides visible in the photos
Typical applications
Production of dies and punches, precision tooling, and parts with complex contours in hardened steels and carbide.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What travels does the Fanuc Robocut α-0iA have?
According to the photographed rating plate, X 320 mm, Y 220 mm, Z 180 mm and, on the wire taper axes, U and V of 120 mm. The max. workpiece weight is 250 kg. The tank measures 770 x 560 mm according to our data sheet.
What is wire EDM used for?
It cuts conductive materials with a wire and electrical discharges, with no mechanical load on the workpiece. It produces complex profiles and accurate internal corners in hardened steel, which is why it is used in die making and tooling. The U and V axes allow taper cutting.
What power supply does it need?
The plate states a three-phase supply at 200 or 220 V, 50 or 60 Hz, with 13 kVA. A 400 V installation would normally require a transformer. Our service engineers can advise you on the installation. The plate also gives the machine weight as 1.2 t, which is useful for planning transport.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
EDM machine Fanuc Robocut Alpha 0iA · Ref. 034916
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.