Your Cart
Search used machines
IBARMIA
Drilling machine Ibarmia A-50
- Year
- 2000
- Taper
- CM-4
- Power
- 3.3 Kw
- Weight
- 710
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | A-50 |
|---|---|
| Type | Pillar |
| Year | 2000 |
Headstock and spindle
| Taper | CM-4 |
|---|---|
| Main motor power | 3.3 Kw |
| Spindle guard | Hinged transparent guard |
Dimensions, weight and connection
| Weight | 710 |
|---|
Other data
| Drilling capacity | 50 |
|---|---|
| Transmission | Gears |
| Emergency stop | Mushroom-head emergency stop on the head panel |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Ibarmia A-50 pillar drill
The A-50 is an Ibarmia pillar drill with 50 mm drilling capacity, Morse 4 taper and gear transmission. The head carries the A-50 marking and the manufacturer's logo.
What the model offers
According to a used-machine listing for another example of the model, the A-50 offers 9 speeds, 3 power feeds and 260 mm drilling depth. These are model data, not confirmed on this unit.
Configuration of this unit
- Model: A-50 (marking on the head)
- Type: pillar
- Drilling capacity: 50 mm
- Taper: MT-4 (Morse 4)
- Transmission: gears
- Main motor power: 3.3 kW (according to our data sheet)
- Year: 2000 (according to our data sheet)
- Transparent spindle guard and mushroom-head emergency stop
- T-slotted table and base, speed chart on the head
Typical applications
Drilling of fabricated and general engineering parts requiring 50 mm capacity and a Morse 4 taper spindle.
See it at Ferrotall
The drill is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What capacity does the Ibarmia A-50 have?
According to our data sheet, the drilling capacity is 50 mm, with a Morse 4 taper spindle and gear transmission. The data sheet gives a 3.3 kW main motor and the year 2000. Listings for the model point to a different power rating, so we will check it on the unit.
What safety features does it have?
The photographs show a hinged transparent guard next to the spindle and a mushroom-head emergency stop on the head panel. These have been seen in the images of the unit; specific regulatory compliance is not recorded in our data sheet, and their operation is checked during the visit.
What does a Morse 4 taper on the spindle mean?
It is the tapered coupling of the spindle: drills or drill chucks with a Morse 4 shank fit directly into it. Our data sheet states CM-4 for this unit, with 50 mm drilling capacity, gear transmission and year 2000. Other shanks are used with suitable reducing sleeves or drill chucks.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Drilling machine Ibarmia A-50 · Ref. 055634
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.