Your Cart
Search used machines
Drilling machine Hedisa TD-13
- Spindle speed
- 400 / 700 / 1,000 / 1,500 / 2,200 / 3,500 rpm
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | TD-13 |
|---|
Headstock and spindle
| Speeds | 400 / 700 / 1,000 / 1,500 / 2,200 / 3,500 rpm |
|---|
Turning
| Drill chuck | Yes, fitted to the spindle |
|---|
Other data
| Drill diameter stated on plate | 2 to 12 mm (HSS, steel 70-90 kgf/mm²) |
|---|---|
| Depth scale | 0 to 120 |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Hedisa TD-13 pillar drill with manual feed
The Hedisa TD-13 is a compact pillar drill, with the motor head mounted on a round column, a rectangular slotted table and a drill chuck. It is used for small-diameter holes in workshop parts, fixtures and short runs.
Key strengths
The plate on the head itself lists six speeds, from 400 to 3,500 rpm, and matches each drill diameter (from 2 to 12 mm) to its recommended speed for HSS twist drills in steels of 70 to 90 kgf/mm². Feed is by lever, and a graduated scale from 0 to 120 shows the depth.
Configuration of this unit
- Model: TD-13 (head plate)
- Make: Hedisa
- Speeds: 400, 700, 1,000, 1,500, 2,200 and 3,500 rpm (plate)
- Drill diameters stated on the plate: 2 to 12 mm
- Drill chuck fitted to the spindle
- Depth scale from 0 to 120, lever feed
- Rectangular slotted table
Typical applications
Drilling 2 to 12 mm holes in steel and other metals; maintenance work, tooling and small batches where a larger drilling machine is not justified.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What drill diameter does the Hedisa TD-13 take?
The head plate matches 2, 4, 6, 8, 10 and 12 mm HSS twist drills to speeds from 3,500 to 400 rpm for steels of 70 to 90 kgf/mm². These are cutting values recommended by Hedisa, not a stated capacity limit; for larger drills or other materials, please check with us.
What spindle speeds does it have?
Six speeds, which according to the head plate are 400, 700, 1,000, 1,500, 2,200 and 3,500 rpm. The low speed is for the largest drills and the high speed for the small ones, so that the cutting speed stays within the range recommended for HSS drills.
What kind of work is this drill suited to?
It is a pillar drill with a table and lever feed, suited to small holes in workshop parts, fixtures, templates and short runs. Given the size of its reference drills (up to 12 mm), it is not intended for drilling large or heavy parts, for which a radial arm drill or a larger pillar drill is a better choice.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Drilling machine Hedisa TD-13 · Ref. 019830
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.