Your Cart
Search used machines
ERLO
Drilling machine Erlo TCA-35
- Year
- 1997
- Taper
- CM-4
- Table
- T-slotted worktable
- Weight
- 580 Kg
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | TCA-35 |
|---|---|
| Type | Pillar |
| Year | 1997 |
| Manufacturer | C.M. Erlo S.A., Azkoitia (Gipuzkoa) |
Travels and table
| Table | T-slotted worktable |
|---|
Headstock and spindle
| Taper | CM-4 |
|---|---|
| Min. / max. spindle-to-column distance | 200 |
Dimensions, weight and connection
| Weight | 580 Kg |
|---|
Other data
| Drilling capacity | 35 |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Erlo TCA-35 pillar drill
The TCA-35 is a pillar drill from the TCA series by Erlo, a manufacturer based in Azkoitia (Gipuzkoa), as shown on the CE plate on the head. With a drilling capacity of 35 mm, it is used for drilling machined parts and for maintenance work in general engineering workshops.
What the model offers
The unit has speed range selector levers, a feed selector with values marked in millimetres, a three-spoke feed handwheel and a graduated depth scale on the head. The motor is mounted on the head and, according to our data sheet, the spindle has a Morse taper 4.
Configuration of this unit
- Model: TCA-35 (marking on the head)
- Type: pillar
- Drilling capacity: 35 mm
- Taper: CM-4 (Morse 4)
- Min. / max. spindle-to-column distance: 200 mm
- Year: 1997 (according to our data sheet)
- Weight: 580 kg
- T-slotted table, main switch and push-button panel with emergency stop
- Connection via red industrial plug
Typical applications
Drilling of short-run parts, pre-drilling holes for tapping and maintenance work in workshops that need a pillar drill with a 35 mm capacity.
See it at Ferrotall
The drill is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is the drilling capacity of the Erlo TCA-35?
According to our data sheet, the drilling capacity is 35 mm, with a Morse taper 4 spindle and a spindle-to-column distance of 200 mm. The unit weighs 580 kg, which is worth bearing in mind for transport and when preparing its location in the workshop.
Who makes the Erlo TCA-35 and what year is it?
The CE plate on the head carries the name C.M. Erlo S.A., registered in Azkoitia (Gipuzkoa), and the model TCA-35 is marked on the head casing. The year 1997 comes from our data sheet; the model and year fields on the plate cannot be read in our photographs and can be checked during a visit.
What is the difference between a pillar drill and a bench drill?
A pillar drill stands on the floor, with the head and table mounted on a column, so it takes heavier workpieces and Morse taper spindles. A bench drill is fixed to a workbench and usually covers smaller diameters. The TCA-35 is a pillar drill, weighing 580 kg according to our data sheet.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Drilling machine Erlo TCA-35 · Ref. 040660
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.