Your Cart
Search used machines
Drilling machine Erlo TC-32
- Year
- 1995
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | TC-32 |
|---|---|
| Type | Pillar |
| Year | 1995 |
Headstock and spindle
| Spindle guard | Yes |
|---|
Other data
| Drilling capacity | 32 |
|---|---|
| Transmission | Gears |
| Emergency stop button | Yes |
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is
Erlo TC-32 pillar drill, from 1995 according to our data sheet, with 32 mm drilling capacity and gear transmission. It is used for drilling, reaming and tapping metal parts in machine shops, maintenance departments and fabrication shops.
Key strengths
The photos show a head marked TC-32 ERLO, feed handwheel and lever, emergency stop button and spindle guard; the table is T-slotted.
Configuration of this unit
- Make and model: Erlo TC-32 (marking on the head)
- Type: pillar
- Drilling capacity: 32 mm
- Transmission: gears
- Year: 1995
- Emergency stop button and spindle guard
- T-slotted table on a column with base
Typical applications
Drilling, reaming and tapping of parts in machine shops, maintenance departments and fabrication shops.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What diameter can this Erlo TC-32 drill?
According to our data sheet, the drilling capacity is 32 mm. The model TC-32 is marked on the head, alongside the ERLO brand. The taper, power and spindle-to-column distance are not recorded in the data sheet, so we recommend you contact us if you need them.
What safety features can be seen in the photos?
The photos show an emergency stop button on the side of the head and a transparent spindle guard with a warning pictogram. This is a visual observation of the unit and does not replace a full safety inspection before it is commissioned in your workshop.
What year is it?
Our data sheet states 1995. No legible rating plate appears in the photos to confirm it, so we will check it on the machine. The drill head carries only the TC-32 ERLO marking, with no further visible power or serial data.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Drilling machine Erlo TC-32 · Ref. 049170
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.