Your Cart
Search used machines
SPIRSIN
Dividing head Spirsin 300 mm
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | 81170F/225 |
|---|---|
| Serial no. | 664 |
| Manufacturer | Spirsin S.C.L., Urnieta |
Turning
| Chuck | 3-jaw |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
What it is
Indexer (rotary table) made by Spirsin S.C.L. of Urnieta (Gipuzkoa), for angular positioning of workpieces on machining centres and milling machines. The plate on this unit shows model 81170F/225 and number 664, with CE marking.
Key strengths
Indexers allow a workpiece to be machined on several faces or with angular divisions without re-clamping it. This unit is shown with the jaw chuck mounted on the indexer housing, lifting eyebolts and a cable with connector for hooking it up.
Configuration of this unit
- Model 81170F/225, number 664 (plate)
- Manufacturer Spirsin S.C.L., Urnieta (plate)
- Size 300 mm according to our title
- 3-jaw chuck fitted
- Two lifting eyebolts on the housing
- Wiring with connector
- Supplied on a wooden pallet
Typical applications
Machining of parts with angular divisions, drilling on a pitch circle, milling of bodies and tooling manufacture.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What is an indexer used for?
It rotates a workpiece through a set angle and locks it so that another face can be machined or holes can be drilled on a pitch circle, without unclamping it. It is mounted on the table of a machining centre or milling machine and extends the operations possible in a single set-up.
Exactly which model is it?
The plate on this unit shows model 81170F/225 and number 664, by Spirsin S.C.L. The 300 mm size comes from our product title. We recommend confirming the exact chuck size and compatibility with your control during the visit.
Does it include a jaw chuck?
Some photos show a three-jaw chuck mounted on the indexer. Another photo shows the unit with a different, plain-faced chuck. It is best to confirm during the visit which accessories are supplied with the unit. Ask us for more photos if you need to see the chuck before travelling.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Dividing head Spirsin 300 mm · Ref. 041839
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.