Your Cart
Search used machines
TECH-SOFT
Digitising arm Tech-Soft
Fresh stock comes in every week and we work with a network of suppliers across Europe. Tell us what you need and we will find you the same machine or a similar one.
We reply within 24 working hours.
Technical data sheet
General data
| Model | TECH-SOFT |
|---|---|
| Brand | Tech'Soft |
Other data
| Connector | Serial-type connector on the base |
|---|
Data from our purchase record, subject to verification. Please confirm any important figure with us before purchase or come and see the machine.
Description and equipment
Used Tech'Soft digitising arm
Manual articulated measuring arm for probing a part and recording the position of the points touched, used for inspection and for capturing geometry for reverse engineering.
What the photos show
The photos show an arm with maroon joints, the Tech'Soft logo engraved on the joint covers and a probe at the end. The arm sits on a base resting on a metal table on castors and still has Mani-Grip packing tape on it. A serial-type connector can be seen on the base.
Configuration of this unit
- Brand: Tech'Soft (logo on the joints)
- Multi-joint arm with probe at the end
- Base with serial-type connector
- Metal table on castors as a stand
The exact model, number of axes, measuring volume, accuracy, software and control unit are not stated in the listing or shown in the photos. We do not include them because we cannot guarantee them.
Typical applications
Digitising parts and moulds, dimensional checks in the workshop and capturing shapes to reproduce or redesign a component.
See it at Ferrotall
The machine is at our premises in Monforte del Cid (Alicante), where you can visit it; contact us to see it running or to receive a video. Our own service engineers take care of transport, installation and commissioning.
Frequently asked questions
What does a digitising arm do?
It is an articulated arm moved by hand. When the probe touches the part, the position of the joints is used to calculate the coordinates of the point. With many points, the shape of the part is obtained, which is useful for checking dimensions or for reverse engineering.
What does it need to work?
An arm of this type is connected to a computer running the appropriate software. A serial-type connector can be seen on the base in the photos, but there is no computer or software in the images. Ask us what is supplied with the arm before you buy.
How accurate is this arm?
We cannot say: it is not stated in our listing and no calibration certificate is visible in the photos. If accuracy is a requirement, ask us to have it confirmed with the manufacturer or by calibration before purchase. Until then, we do not give it as a figure for this unit.
Visit, transport and commissioning
- See it running Visit it at our facilities or ask us for a video of the machine under power.
- Transport We handle dismantling, loading and transport to your workshop.
- Commissioning Installation, levelling and commissioning by our service engineers.
- More than 45 years Used machinery trading backed by our service engineers.
If we don't have it, we'll find it
Digitising arm Tech-Soft · Ref. 050778
Tell us what you need. We search our stock, upcoming arrivals and our supplier network across Europe.